Table of Contents
Advertisement
ENGLISH
•
Repeat this around the head.
•
Let the hair cool before further styling.
Root volume using the root boost attachment
•
Push the root boost slowly into your roots towards the centre of your head.
•
Allow the hair to push against the root boost and hold the root boost there for up to 10
seconds.
•
Repeat until you have voluminous hair.
Cool shot
•
To set your style, press the cool shot button whilst styling then release it to reactivate
the heat.
Memory Function
•
Each time you use your styler it will automatically set itself to the last setting used.
STORAGE, CLEANING AND MAINTENANCE
•
After use, turn off the appliance by pressing the on/off button.
•
Unplug the appliance and allow to cool before cleaning and storing away.
•
Wipe all surfaces with a damp cloth
•
Don't use harsh or abrasive cleaning agents or solvents,
•
To maintain peak product performance and to prolong motor life, it is important to
regularly remove any dust and dirt from the inlet grille and clean with a soft brush.
OVERHEATING PROTECTION
In the event of overheating, your airstyler may stop unexpectedly. Overheating is usually
caused by a blocked inlet grille. Unplug your airstyler then check and clean the inlet grille if
required. Allow your airstyler to cool down before plugging it back in and using.
RECYCLING
W
6
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.
Advertisement
Table of Contents
