CREATING VOLUME USING THE 50MM BRUSH
1.
To dry your roots and add volume, place the brush underneath the
section close to the roots and hold for a few seconds, lifting the hair
as you dry.
2.
Move the styler downward through the hair section.
3.
Repeat this around the head.
4.
Let the hair cool before further styling.
CREATING CURLS AND SHAPED ENDS USING THE 30MM AND 50MM
BRUSHES
1.
To curl the ends in, place the brush underneath the section close
to the ends and rotate the styler inwards allowing the hair to wrap
around the barrel and hold for a few seconds.
2.
To curl the ends out, place the brush on top of the section close to the
ends and rotate the styler outwards allowing the hair to wrap around
the barrel and hold for a few seconds.
3.
Repeat this around the head.
4.
Let the hair cool before further styling.
COOL SETTING
To set your style, use the cool setting. To operate press the cool shot button
down and slide forward. Slide back to turn off.
STORAGE, CLEANING AND MAINTENANCE
•
After use, unplug the appliance and allow to cool before cleaning and
storing away.
•
Wipe all surfaces with a damp cloth
•
Don't use harsh or abrasive cleaning agents or solvents,
•
To maintain peak product performance and to prolong motor life, it is
important to regularly remove any dust and dirt from the inlet grille.
•
Clean the inlet grille with a cloth or soft brush.