Table of Contents
Advertisement
en Basic operation
Basic operation
13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Turn the programme selector to a
▶
programme.
a The appliance performs an audible
function test in the detergent
drawer.
13.2 Setting a programme
Set the programme selector to the
1.
required programme.
→ "Programmes", Page 25
If necessary, adjust the pro-
2.
gramme settings → Page 38.
38
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 38
Adjust the programme settings.
▶
→ "Programmes", Page 25
Notes
¡ The programme settings are not
saved permanently for the pro-
gramme.
¡ The setting is saved if you activate
or deactivate the intelligent dosing
system.
13.4 Loading laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the
→ "Programmes", Page 25.
Requirement: The laundry is pre-
pared and sorted.
→ "Laundry", Page 34
Open the door.
1.
Make sure that the drum is empty.
Load the laundry unfolded into the
2.
drum.
Close the door.
3.
Advertisement
Table of Contents
