Bosch WAU24S9ASN User Manual And Installation Instructions

Bosch WAU24S9ASN User Manual And Installation Instructions

Table of Contents

Advertisement

Quick Links

Washing machine
WAU24S9ASN
[en]
User manual and installation
instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WAU24S9ASN

  • Page 1 Washing machine WAU24S9ASN [en] User manual and installation instructions...
  • Page 2: Table Of Contents

    Table of contents 1 Safety ..........   4 10 Before using for the first time........   33 1.1 General information.... 4 10.1 Starting an empty washing 1.2 Intended use....... 4 cycle ........ 33 1.3 Restriction on user group... 4 1.4 Safe installation ...... 5 11 Laundry........   34 1.5 Safe use ........ 7 11.1 Preparing the laundry ..... 34 1.6 Safe cleaning and mainten-...
  • Page 3 15 Intelligent dosing system ..   41 15.1 Filling the dispenser .... 41 15.2 Basic dosage ...... 42 16 Basic settings......   43 16.1 Overview of the basic set- tings........ 43 16.2 Changing the basic set- tings........ 44 17 Cleaning and servicing ....    44 17.1 Tips on appliance care... 44 17.2 Cleaning the drum.... 44 17.3 Cleaning the detergent...
  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
  • Page 5: Safe Installation

    Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
  • Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
  • Page 7: Safe Use

    Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
  • Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
  • Page 9: Safe Cleaning And Maintenance

    Safety en CAUTION ‒ Risk of chemical burns! If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation. ▶ Rinse eyes and/or skin thoroughly with clean water if they come into contact with detergents or care products.
  • Page 10: Preventing Material Damage

    en Preventing material damage If the water pressure is too high or Preventing material damage 2 Preventing material too low, the appliance may not be able to operate properly. damage Make sure that the water pressure ▶ in the water supply system is min. Follow these instructions to avoid ma- Preventing material damage 100 kPa (1 bar) and max.
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en Reduce the washing temperature for Environmental protection and saving energy 3 Environmental protec- lightly and normally soiled laundry. tion and saving energy a At low temperatures, the appliance consumes less energy. For light to Environmental protection and saving energy normal soiling, lower temperatures 3.1 Disposing of packaging than indicated on the care label...
  • Page 12: Installation And Connection

    en Installation and connection Remove any packaging and pro- Installation and connection 4 Installation and con- tective covers completely from the appliance. nection For the environmentally friendly Installation and connection disposal of the packaging materi- 4.1 Unpacking the appliance als, observe the information on the topic of Note: Please read the information in → "Disposing of packaging",...
  • Page 13: Contents Of Package

    Installation and connection en 4.2 Contents of package After unpacking all parts, check for any damage in transit and completeness of the delivery. Washing machine WARNING Risk of electric shock! Accompanying documents The appliance contains live parts. Touching live parts is dangerous. Water inlet hose Do not operate the appliance ▶...
  • Page 14: Removing The Transit Bolts

    en Installation and connection ATTENTION! Installation loca- Requirements If the appliance is installed in areas tion exposed to frost or outdoors, frozen On a wall Do not trap the residual water may damage the appli- hoses between ance and frozen hoses may crack or the wall and the split.
  • Page 15: Connecting The Appliance

    Installation and connection en Unscrew and remove all four Put on the four cover caps. screws for the transit bolts with a WAF 13 wrench. Press down on the four cover caps. Pull the power cord out of the holder. 4.5 Connecting the appliance Remove the four sleeves.
  • Page 16 en Installation and connection Connect the water inlet hose. Water outlet connection types This information is intended to help you to connect this appliance to the water outlet. Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance safely.
  • Page 17: Aligning The Appliance

    Installation and connection en Screw the lock nuts tightly against 4.6 Aligning the appliance the housing using a WAF 17 In order to reduce noise and vibra- wrench. tion and to prevent the appliance from moving, align the appliance cor- rectly. Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance...
  • Page 18 en Familiarising yourself with your appliance Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
  • Page 19: Familiarising Yourself With

    Familiarising yourself with your appliance en 5.2 Detergent drawer Manual dosing compartment : Dispenser for fabric softener : Dispenser for detergent 5.3 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 25 Programme selector → Page 38...
  • Page 20: Display

    en Display Display 6 Display The display shows the current settings, options or relevant information. Display Display Designation Description 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining "Ready in" time The programme end has been set and the remaining number of hours is displayed.
  • Page 21 Display en Display Designation Description Rinse Programme status Spin Programme status - -  - - Rinse Hold Programme status End of pro- Programme status gramme Childproof lock ¡ Lights up: The childproof lock is activ- ated. ¡ Flashes: The childproof lock is active and the programme selector has been adjusted.
  • Page 22 en Display Display Designation Description ⁠ Voltage control Flashes: The automatic voltage control system system detects impermissible voltage drops. This will pause the programme. Note: The programme will continue when the voltage is permissible again. ⁠ Voltage control Flashes: The programme has been system paused because of impermissible voltage drops.
  • Page 23: Buttons

    Buttons en Buttons 7 Buttons The selection of programme settings depends on the selected programme. You Buttons can see the selection options for each programme in the overview for → "Programmes", Page 25. Button Selection Description ⁠ (Start/Pause) ¡ Start Start, cancel or pause the pro- gramme.
  • Page 24 en Buttons Button Selection Description ⁠   3 sek. (Chid ¡ Activate Activate or deactivate the childproof Lock 3 sec.) lock. ¡ Deactivate Disable the control panel to prevent unwanted or accidental operation. If the childproof lock is activated and the appliance has been switched off, the childproof lock remains activated.
  • Page 25 Programmes en ⁠ ⁠ ⁠   i-DOS  ⁠ ⁠ ⁠   i-DOS  ⁠ ⁠ - -  - - (Rinse Hold) ⁠ ⁠ ⁠ – ⁠ ⁠ Max. spin speed 1200 1200 (rpm) Max. temperature (°C) Max. load (kg)
  • Page 26 en Programmes ⁠ ⁠   i-DOS  ⁠ ⁠   i-DOS  ⁠ - -  - - (Rinse Hold) ⁠ ⁠ – ⁠ Max. spin speed 1200 (rpm) – Max. temperature (°C) Max. load (kg)
  • Page 27 Programmes en ⁠   i-DOS  ⁠   i-DOS  - -  - - (Rinse Hold) ⁠ – ⁠ Max. spin speed 1200 1200 (rpm) Max. temperature (°C) Max. load (kg)
  • Page 28 en Programmes – ⁠   i-DOS  – – – ⁠   i-DOS  – - -  - - (Rinse Hold) – – ⁠ – – – ⁠ Max. spin speed 1200 1200 (rpm) – – Max. temperature (°C) Max. load (kg)
  • Page 29 Programmes en – ⁠   i-DOS  – ⁠   i-DOS  - -  - - (Rinse Hold) – ⁠ – ⁠ Max. spin speed 1200 (rpm) – Max. temperature (°C) Max. load (kg)
  • Page 30 en Programmes – – ⁠   i-DOS  – – ⁠   i-DOS  – - -  - - (Rinse Hold) – ⁠ – – ⁠ Max. spin speed 1200 1200 (rpm) – Max. temperature (°C) Max. load (kg)
  • Page 31 Programmes en ⁠   i-DOS  ⁠   i-DOS  - -  - - (Rinse Hold) ⁠ ⁠ Max. spin speed 1200 (rpm) Max. temperature (°C) Max. load (kg)
  • Page 32 en Programmes ⁠ ⁠   i-DOS  ⁠ ⁠   i-DOS  ⁠ - -  - - (Rinse Hold) ⁠ ⁠ ⁠ ⁠ Max. spin speed 1200 (rpm) Max. temperature (°C) Max. load (kg)
  • Page 33: Accessories

    Accessories en Accessories 9 Accessories Use original accessories. These have been made especially for your appliance. Accessories Order number Water inlet hose exten- Extend the water inlet WMZ2381 sion hose for cold water or AquaStop (approx. 2.50 Pedestal with drawer Install the appliance at a WMZPW20W raised height so that it can be easily loaded and...
  • Page 34: Laundry

    en Laundry Pour approx. 1 litre of water into Press ⁠ (Start/Pause) to start the manual dosing compartment. the programme. a The display shows the remaining programme duration. a After the programme has ended, the display shows: End. Start the first wash cycle or set the programme selector to Av to switch off the appliance.
  • Page 35: Sorting Laundry

    Laundry en – Use a mesh laundry bag for To improve washing results and ▶ small items of laundry, such as prevent discolouration, sort the children's socks laundry according to the following – Some stubborn or dried-in stains criteria before washing. can be removed by washing –...
  • Page 36: Detergents And Care

    en Detergents and care products Symbol Washing process Recommended pro- gramme ⁠ Gentle Easy-Care ⁠ Particularly gentle Delicates/Silk for washing by hand Hand wash Wool Not suitable for machine-washing – Notes Detergents and care products 12 Detergents and care ¡ only use liquid detergents that are self-flowing products ¡...
  • Page 37: Detergent Dosage

    Detergents and care products en Tip: Visit www.cleanright.eu to find further information on detergents, care products and cleaning agents for domestic use. 12.2 Detergent dosage The detergent dosage depends on: You can find out how hard your ¡ The amount of laundry water is from your local water com- pany or measure it yourself using ¡...
  • Page 38: Basic Operation

    en Basic operation 13.3 Adjusting the pro- Basic operation 13 Basic operation gramme settings Basic operation Depending on the programme and 13.1 Switching on the appli- programme progress, you can adjust ance or activate/deactivate the settings. Note: Overview of all programme set- Turn the programme selector to a ▶...
  • Page 39: Adding Detergent And Care Product

    Basic operation en Ensure that the drum is empty. a The drum rotates and load detec- tion takes place. This can take up Separate the laundry and place it to 2 minutes, after which water in the drum. enters the drum. Note: Ensure that there is no laun- a The display shows either the pro- dry trapped in the door.
  • Page 40: Cancelling The Programme

    en Basic operation Remove the laundry. 13.9 Cancelling the pro- gramme Once the programme has started, you can cancel it at any time. Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance safely.
  • Page 41: Childproof Lock

    Childproof lock en Leave the door and detergent Intelligent dosing system 15 Intelligent dosing sys- drawer open so that residual water can evaporate. The optimum quantities of liquid de- Intelligent dosing system tergent and fabric softener are dis- Childproof lock 14 Childproof lock pensed automatically depending on the programme and settings.
  • Page 42: Basic Dosage

    en Intelligent dosing system Pour liquid detergent and fabric softener into the relevant dis- pensers. → "Detergent drawer", Page 19 Close the dispenser lid. Note: To prevent the detergent from drying out or drying up, do not leave the dispenser lid open for a long period of time. Push in the detergent drawer.
  • Page 43: Basic Settings

    Basic settings en Basic settings 16 Basic settings You can configure the appliance to meet your needs. Basic settings 16.1 Overview of the basic settings Below is an overview of the basic settings on your appliance. Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet)
  • Page 44: Tings

    en Cleaning and servicing 16.2 Changing the basic set- with nothing but water and a tings damp cloth. Set the programme selector to po- Remove all de- Fresh deposits sition 1. tergent residue, are easier to re- spray residue or move without other residues leaving any immediately.
  • Page 45: Cleaning The Detergent Drawer

    Cleaning and servicing en Unclip the detergent drawer lid 17.3 Cleaning the detergent and remove it. drawer If you change detergent or the deter- gent drawer is dirty, clean the deter- gent drawer and the pump unit of the intelligent dosing system. Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections...
  • Page 46 en Cleaning and servicing ATTENTION! The pump unit con- tains electrical components. Do not clean the pump unit in the ▶ dishwasher and do not immerse it in water. Protect the electrical connection ▶ on the rear against water, deter- gent and fabric softener residue. Clean the pump unit with a damp cloth.
  • Page 47: Descaling

    Cleaning and servicing en Remove the maintenance flap. 17.4 Descaling If you add detergent correctly, you do not need to descale your appliance. If you still wish to use descaler, follow the manufacturer's instructions for use. ATTENTION! The use of unsuitable descaling agents, e.g.
  • Page 48 en Cleaning and servicing Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Note: Please read the information in ures, the detergent solution gets the Safety → Page 4 and Preventing hot. material damage → Page 10 sections Do not touch the hot detergent to ensure that you use the appliance ▶...
  • Page 49: Cleaning The Water Outlet Hose At The Siphon

    Cleaning and servicing en Insert the pump cap and screw it 17.6 Cleaning the water outlet on as far as it will go. hose at the siphon If the water outlet hose at the siphon is dirty or the detergent solution is not being pumped out, you must 90°...
  • Page 50: Clean The Water Inlet Filters

    en Cleaning and servicing Reattach the water outlet hose and Remove the water inlet hose from secure the connection point using the tap. the hose clamp. Clean the filter with a small brush. 17.7 Clean the water inlet fil- ters. Emptying the water inlet hose Turn off the tap.
  • Page 51 Cleaning and servicing en Clean the filter with a small brush. Cleaning the filter on the appliance Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance safely. Requirement: The water inlet hose is empty.
  • Page 52: Troubleshooting

    en Troubleshooting Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 53 Troubleshooting en Fault Cause and troubleshooting "E:36 / -10" Remove any unapproved extensions from the water ▶ hose. Connecting the appliance "E:36 / -25 / -26" Drain pump is blocked. → "Cleaning the drain pump", Page 47 ▶ "E:10 / -00 / -10 / The pump for the intelligent dosing system is blocked.
  • Page 54 en Troubleshooting Fault Cause and troubleshooting lights up. Laundry is caught in the door. Open the door again. Remove any trapped laundry. Close the door. Press ⁠ to start the programme. flashes. Door is not closed. Close the door. Press ⁠ to start the programme. All other error codes.
  • Page 55 Troubleshooting en Fault Cause and troubleshooting The programme does Clean the pump unit. not start. → "Cleaning the detergent drawer", Page 45 If this indicator appears again, call our after-sales service. → "Customer Service", Page 64 Note: You can start the washing programme if you de- activate the intelligent dosing system and dose manu- ally.
  • Page 56 en Troubleshooting Fault Cause and troubleshooting The water is not drain- Immediate measure: Mix one tablespoon of fabric ▶ ing. softener with 0.5 litres of water and pour the mix- ture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down).
  • Page 57 Troubleshooting en Fault Cause and troubleshooting The programme dura- Not a fault – no action required. ▶ tion changes during the wash cycle. No water is visible in Water is below the visible area. the drum. Not a fault – no action required. ▶...
  • Page 58 en Troubleshooting Fault Cause and troubleshooting High spin speed not Note: Where possible, mix large and small items in reached. the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Centrifugering programme. ▶ The spin programme Drain pipe or water outlet hose is blocked. does not start.
  • Page 59 Troubleshooting en Fault Cause and troubleshooting Creasing. The spin speed is too high. The next time you run a wash cycle, set a lower ▶ spin speed. The load is too large. The next time you run a wash cycle, reduce the ▶...
  • Page 60 en Troubleshooting Fault Cause and troubleshooting Detergent residue on Check whether the detergent used is suitable. the damp washing. Drain the dispenser. → "Cleaning the detergent drawer", Page 45 Clean the dispenser. Refill the dispenser. → "Filling the dispenser", Page 41 Basic dosage is not correctly adjusted. If intelligent dosing is activated, reduce the basic ▶...
  • Page 61 Troubleshooting en Fault Cause and troubleshooting Insufficient cleaning. Refill the dispenser. → "Filling the dispenser", Page 41 Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. Connect the water supply hose correctly. Connect- ing the water inlet hose Tighten the screw connection.
  • Page 62: Transportation, Storage And Disposal

    en Transportation, storage and disposal Drain the remaining detergent 18.1 Emergency release solution. Releasing the door → "Cleaning the drain pump", Page 47 Requirement: The drain pump is Detach the hoses. empty. → Page 47 Empty the dispensers. ATTENTION! Escaping water may cause material damage. 19.2 Inserting the transit Do not open the door if you can ▶...
  • Page 63: Using The Appliance Again

    Transportation, storage and disposal en Insert all screws into the four Pour approx. 1 litre of water into transit bolts and tighten slightly. the manual dosing compartment in the detergent drawer. Start the Urpumpning programme. a The unused detergent cannot flow straight into the outlet during the next wash.
  • Page 64: Customer Service

    en Customer Service If you contact Customer Service, you tronic appliances (waste will require the product number (E- electrical and electronic Nr.) and the production number (FD) equipment - WEEE). of your appliance. The guideline determ- The contact details for Customer Ser- ines the framework for vice can be found in the enclosed the return and recycling...
  • Page 65: Consumption Values

    Consumption values en Consumption values 21 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456.
  • Page 66: Technical Specifications

    en Technical specifications of printing its web address had not Technical specifications 22 Technical specifica- yet been published. Please then fol- low the instructions on searching for tions models. The model identifier is made up of the characters before the slash Facts and figures for your appliance Technical specifications in the product number (E-Nr.) on the can be found here.
  • Page 68 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.

Table of Contents