Fault
The appliance is not
working.
The programme does
not start.
The door cannot
be opened.
The water is not drain-
ing.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
You have not pressed Inicio/Pausa + Carga
Press Inicio/Pausa + Carga
▶
Door is not closed.
Close the door.
1.
Press Inicio/Pausa + Carga
2.
gramme.
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 40
▶
is activated.
Termin.
Check whether Termin.
▶
→ "Buttons", Page 23
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Inicio/Pausa + Carga
4.
gramme.
– – – – is activated.
Continue the programme by selecting
▶
pressing Inicio/Pausa + Carga
→ "Resuming the programme when the programme
status is Rinse Hold", Page 39
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 39
▶
Water level is too high.
Start the
programme.
▶
Power failure.
Open the door using the emergency release.
▶
→ "Emergency release", Page 57
Drain pipe or water outlet hose is blocked.
Clean the drain pipe and the water outlet hose.
▶
Troubleshooting en
.
to start the pro-
is activated.
to start the pro-
or
.
.
and
51