Table of Contents
Advertisement
Operating the appliance
en
Water Plus
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or for an even
better rinsing result.
1
Operating the
appliance
i n g
O p e r a t
Install and connect washing
Note:
machine properly. ~ Page 29
Before the 1st wash, wash once
without any washing. ~ Page 34
Preparing the washing
machine
Notes
Never switch on a damaged
■
washing machine!
Inform customer service!
■
~ Page 26
Insert mains plug.
1.
Turn the tap on.
2.
Open the washing machine door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must deactivate it
before you can set a programme.
16
t h e
Use the programme selector to select
the required programme. Can be
rotated in either direction.
The washing machine is switched on.
The following figures are indicated
continuously on the display panel for
the selected programme:
the programme duration,
■
the preset temperature,
■
the preset spin speed and
■
the maximum load.
■
a n c e
a p p l i
Change the programme
default settings
You can use the displayed programme
presettings or adjust them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed. They are not
saved when the appliance is switched
off.
Programme default settings
~ Page 14
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is active. The settings are
not saved when the appliance is
switched off.
Additional programme settings
~ Page 15
Advertisement
Table of Contents
