Table of Contents
Advertisement
Programme default settings
en
Programme/type of laundry/information
0 Spin/
Extra spin with speed that can be selected
[ Drain
Drain the rinsing water after - - - (Rinse Hold = without final spin cycle).
O Rinse
Extra rinse with spin
Starching
Laundry must not be treated with
Note:
fabric softener.
Starching is possible in all wash
programmes if liquid starch is used.
Measure starch into compartment M in
accordance with the manufacturer's
instructions (clean first if necessary).
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to
bleach clothes.
Soaking
Pour soaking agent/detergent into
1.
dispenser II according
to the manufacturer's instructions.
Turn the programme selector to
2.
i ü Cottons 40 °C.
Select Start/Reload.
3.
After approximately 10 minutes
4.
select Start/Reload.
After the required soaking time,
5.
press Start/Reload again to
continue or change the programme.
14
Notes
Load laundry of the same colour.
■
No additional detergent is required,
■
the soaking solution is used for
washing.
0
Programme default
settings
P r o g r a
m m e
The temperature, spin speed and
programme duration (Ready in time) for
all programmes are preset at the
factory.
These are displayed in the display panel
after selecting the programme.
You can change the default settings as
follows.
Temperature
Depending on the programme
progress, you can change the preset
washing temperature (in °C) before and
during the programme.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
Settings
-
-
- - - ... 1000 rpm
-
-
-
- - - ... 1000 rpm
Z
t
d e f a u l
i n g s
s e t t
Advertisement
Table of Contents
