Table of Contents
Advertisement
7
DVD Setup Menu
Creating your own setting (1)
1 Select 'Start'.
2 Select 'Video Setup'
Video Memory Select
Video Setup
3 Use the cursor 5 or ∞ buttons to select a
picture quality parameter, then press
cursor 2 or 3 to adjust that parameter.
Prog. Motion
• Prog. Motion – When using progressive
scan, this adjusts the motion and still picture
quality.
• PureCinema – When watching DVD movies,
PureCinema optimizes the picture quality. The
default setting is Auto1, but if the picture
appears unnatural, then set to Auto2, On or
Off as desired and adjust the Prog. Motion
setting (see above). See PureCinema in the
Glossary starting on page 57.
• YNR – Adjusts the amount of noise reduction
(NR) applied to the Y (brightness) compo-
nent.
• CNR – Adjusts the amount of noise reduc-
tion (NR) applied to the C (colour) compo-
nent.
• MNR (Mosquito Noise Reduction) – Adjusts
the amount of noise reduction applied to the
mosquito noise (video artifacts on the edge
of the image resulting from MPEG compres-
sion).
• BNR (Block Noise Reduction) – Adjusts the
amount of noise reduction applied to the
block noise.
46
En
fast
slow
Move
Select
Check
ENTER
DISPLAY
• Sharpness High – Adjusts the sharpness of
the high-frequency (finely detailed) elements
in the picture.
• Sharpness Mid – Adjusts the sharpness of
the mid-frequency (less detailed) elements in
the picture.
• Detail – Adjusts how sharp edges appear in
the picture.
• White Level – Adjusts the intensity of white
in the picture.
• Black Level – Adjusts the intensity of black in
the picture.
• Black Setup – For correction of floating
black colour.
• Gamma – Adjusts the brightness of the
darker images in the picture.
• Hue – Adjusts the overall colour balance
between red and green.
• Chroma Level – Adjusts how saturated
colours appear.
• Chroma Delay – Compensates for misalign-
ment of the Y (brightness) and the C
(colour) components.
4 Press ENTER to save your changes.
Advertisement
Table of Contents
