Pioneer DV-S633A Operating Instructions Manual page 38

7 DVD Setup Menu
MPEG Out
• Default setting: MPEG 3 PCM
You only need to make this setting if you connected
the player to another component (AV amplifier, etc.)
using one of the digital outputs.
If your AV amplifier (or other connected
component) is compatible with MPEG audio, set
this to MPEG, otherwise set it to MPEG 3 PCM
(MPEG audio is converted to more compatible
PCM audio). Check the manual that came with
the other component if you're unsure whether it
is MPEG audio compatible.
Audio1
Change MPEG audio output mode
Digital Out
• Default setting: On
If at any time you need to switch off the digital
audio output, set this to Off, otherwise leave it
On. Note that you can't switch on/off the
optical and coaxial outputs individually.
Audio1
38
En
A2 Video1 V2 Language General
Audio DRC — Off
Dolby Digital Out — Dolby Digital
DTS 3 PCM
DTS Out —
Linear PCM Out MPEG
MPEG 3 PCM
MPEG Out —
Move SETUP Exit
A2 Video1 V2 Language General
Audio DRC — Off
Dolby Digital Out — Dolby Digital
DTS 3 PCM
DTS Out —
Linear PCM Out — Down Sample On
MPEG 3 PCM
MPEG Out —
Digital Out On
Off
Move Exit
SETUP
Virtual Surround
• Default setting: Off
If you connected your DVD player using only
the stereo analog outputs and set Audio Out
(see below) to 2 Channel, you can simulate
surround sound by setting Virtual Surround to
TruSurround.
A1 Audio2 Video1 V2
Virtual Surround —
Legato PRO
Audio Out —
Speaker Setting
Surround effect from 2 speakers
Move
Note
• There is no effect when the audio source is
DVD-Audio, DTS or 96 kHz LPCM or during
CD or MP3 playback.
• The digital audio output level is reduced
when playing 2 channel Dolby Digital DVDs
or Super VCDs/Video CDs with TruSurround
selected. If you play a multichannel Dolby
Digital DVD with Dolby Digital to PCM
conversion (see page 37) and TruSurround
selected, there is no digital output.
• How good the surround effect is varies with
the disc.
TruSurround
TruSurround uses technology that simulates
multichannel surround sound using only two
speakers.
Language General
Off
TruSurround
2Channel
Exit
SETUP