Before First Use - Electrolux ESA47200SX User Manual

CAUTION!
If children have access to
the appliance, we advise to
deactivate AirDry （空气对流
干燥）. The automatic
opening of the door may
pose a danger.
How to deactivate AirDry （空气
对流干燥）
Make sure the appliance is in user mode.
1. Press

8. BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in
the baskets.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
8.1 The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
.
• The indicator
• The remaining indicators are off.
• The display shows the current
setting:
– = AirDry （空气对流干燥）
is deactivated.
– = AirDry （空气对流干燥）
is activated.
2. Press to change the setting.
3. Press the on/off button to confirm the
setting.
2. Put 1 litre of water in the salt
container (only for the first time).
3. Fill the salt container with 1 kg of salt
(until it is full).
4. Carefully shake the funnel by its
handle to get the last granules inside.
5. Remove the salt around the opening
of the salt container.
6. Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out
of the salt container when
you fill it. After you fill the
salt container, immediately
start a programme to
prevent corrosion.
ENGLISH 13
still flashes.