Electrolux ESA42110SW User Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Dishwasher
  5. ESA42110SW
  6. User manual

Electrolux ESA42110SW User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ESA42110SW
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Electrolux ESA42110SW

Summary of Contents for Electrolux ESA42110SW

  • Page 1 ESA42110SW Dishwasher User Manual...

  • Page 2: Table Of Contents

    14. ENVIRONMENTAL CONCERNS..............25 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    (average) domestic usage levels. Do not change the specification of this appliance. • The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 9 place settings.
  • Page 5 ENGLISH • Make sure that the parameters on the • If the water inlet hose is damaged, rating plate are compatible with the immediately close the water tap and electrical ratings of the mains power disconnect the mains plug from the supply.

  • Page 6: Product Description

    2.6 Disposal peripherals such as baskets and lids. • Concerning the lamp(s) inside this...

  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. It is al‐ ways off while the programme operates. Rinse aid indicator.

  • Page 8: Programmes

    5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme Dishwasher Degree of Programme phases Options load soil Crockery, Normal, • Prewash • ExtraPower cutlery, lightly • Dishwashing 50 °C •...
  • Page 9 ENGLISH Programme Dishwasher Degree of Programme phases Options load soil • Prewash 1) This programme offers the most efficient use of water and energy consumption for crock‐ ery and cutlery with normal soil. This is the standard programme for test institutes. This pro‐ gramme is used to assess compliance with the Ecodesign Comission Regulation (EU) 2019/2022.

  • Page 10: Options

    6. OPTIONS prevents rapid changes in the Desired options must be dishwashing temperature of the selected activated every time before programme and reduces it to 45 °C. you start a programme. It is not possible to activate How to activate GlassCare or deactivate options while a programme is running.
  • Page 11 ENGLISH 7.2 The water softener not, set the programme selection mode the following way: The water softener removes minerals from the water supply, which would have Press and hold simultaneously a negative effect on the washing results until the appliance is in programme and on the appliance.
  • Page 12 All the consumption values Water softener Amount of water mentioned in this section are level determined in line with the currently applicable standard in laboratory conditions with water hardness 2.5mmol/L (water softener: level 3) according to the regulation: 2019/2022 .

  • Page 13: Before First Use

    ENGLISH When AirDry opens the door, the display How to set the rinse aid level shows the remaining time of the running programme. Make sure the appliance is in user mode. CAUTION! 1. Press Do not try to close the •...

  • Page 14: Daily Use

    8.1 The salt container CAUTION! Water and salt can come out CAUTION! of the salt container when Use rough salt designed for you fill it. After you fill the dishwashers only. Fine salt salt container, immediately increases the risk of start a programme to corrosion.
  • Page 15 ENGLISH 9.1 Using the detergent The function comes into operation: • When the programme is complete. • After 5 minutes if a programme was not started. Starting a programme 1. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode.

  • Page 16: Hints And Tips

    Press and hold simultaneously If the door is opened for more than 30 seconds until the appliance is in programme during the drying phase, the selection mode. running programme ends. It does not happen if the door Cancelling the programme is opened by AirDry function.
  • Page 17 ENGLISH 10.2 Using salt, rinse aid and 4. When the programme is complete, adjust the water softener according detergent to the water hardness in your area. 5. Adjust the released quantity of rinse • Only use salt, rinse aid and detergent aid.

  • Page 18: Care And Cleaning

    10.6 Unloading the baskets After the programme is completed, water can still 1. Let the tableware cool down before remain on the inside you remove it from the appliance. Hot surfaces of the appliance. items can be easily damaged.
  • Page 19 ENGLISH 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4.
  • Page 20 2. Wash the spray arm under running 1. Pull out the upper basket. water. Use a thin pointed tool, e.g. a 2. To detach the spray arm, turn the toothpick, to remove particles of soil mounting element clockwise. from the holes.

  • Page 21: Troubleshooting

    ENGLISH 12. TROUBLESHOOTING to contact an Authorised Service WARNING! Centre. Improper repair of the Refer to the below table for information appliance may pose a on possible problems. danger to the safety of the user. Any repairs must be With some problems, the display shows performed by qualified an alarm code.
  • Page 22 Problem and alarm code Possible cause and solution Malfunction of the wash • Switch the appliance off and on. pump or the drain pump. The display shows i51 - i59 or i5A - i5F. The temperature of the wa‐...
  • Page 23 ENGLISH Problem and alarm code Possible cause and solution Rattling/knocking sounds • The tableware is not properly arranged in the bas‐ from inside the appliance. kets. Refer to basket loading leaflet. • Make sure that the spray arms can rotate freely. The appliance trips the cir‐...
  • Page 24 Problem Possible cause and solution There are stains and dry wa‐ • The released quantity of rinse aid is not sufficient. ter drops on glasses and Adjust the rinse aid dosage to a higher level. dishes. • The quality of the rinse aid can be the cause.

  • Page 25: Technical Information

    ENGLISH Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 446 / 850 / 615 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min.
  • Page 28 www.electrolux.com/shop...

Table of Contents