Table of Contents
Advertisement
Don't touch the tip of bracket to other parts of server
When you insert the adapter into expansion slot, be careful not to touch the tip of
bracket to other parts of server (such as other components or board). Otherwise, they
may be damaged.
Firmly connect the network cable
When connecting the cable, insert the cable connector until you hear a click sound.
Anti-static Measures
Installing or Uninstalling Internal Optional Devices
(1) To avoid electric hazard and malfunction of the device, be sure to turn off the
Power switch of the server and unplug the power cord from outlet before starting
work, except for hot-swappable devices.
(2) The Optional Devices contains electronic components sensitive to static electricity.
Avoid failures caused by static electricity when installing or removing any optional
devices. Wear a wrist strap on your wrist and provide earthing before starting
work. If no wrist strap is available, discharge static electricity from your body by
touching an unpainted metal part of the chassis which is grounded.
(3) Handling of cables
When connecting a cable (e.g., LAN cable), static electricity may also be charged
due to friction against floor. Connecting a charged cable with an I/O device may
cause damage to the device.
It is recommended to discharge static electricity before connecting a cable by
using ionizer or the like. Consult with your sales representative for apparatus to
discharge static electricity.
E-7
Advertisement
Table of Contents
