Advertisement
www.mayones.com
Battery Operation - Remarks
The Cali bass utilizes a 3.7V Li-Po (Lithium-Polymer) battery, with a capacity of 1,400 mA.
The battery features PCM safeguards, protecting from excessive depletion and overcharging,
which guarantees optimal lifetime for the battery.
The battery would retain its baseline performance over ca. 500 charge-discharge cycles.
Should a noticeable performance and capacity drop occur, the battery should be replaced, or
the user should get in touch with Mayones. The battery is placed on the inner side of the
electronics cover. To replace the battery, unscrew the cover, disconnect the preamp PCB
connector, disconnect the battery and carefully remove it, taking care of gently separating the
adhesive. The new battery is delivered with mounting tape, making it possible to easily and
rigidly install it on the back plate. The connection shall be done in reverse order.
Note:
The headphone amp may only be powered by the 3.7V battery that is the same as the original. Using
any other cell may damage the headphone amp, or even lead to an explosion of the battery which
may consequently cause fire and/or injury.
Battery Disposal
The battery in the instrument is recyclable. The battery must be disposed of
separately from household waste. Please treat is as hazardous waste and return it to
the seller or the battery recycling point. You should only dispose of batteries that are
discharged and completely depleted. This will help in conserving resources, and in
protecting human health and the environment.
Mayones Cali Bass – User Manual
- 9 -
Advertisement
