BMW 2 Series Owner's Handbook Manual page 223

Operating requirements
▷ A GPS signal must be received.
▷ A BMW ID or a driver profile must be acti-
vated.
▷ The direction of travel, selector lever posi-
tion and vehicle angle must correspond to a
saved activation point.
Saving activation points
1. Drive the vehicle to the position where the
system should switch on and stop.
2. Press the button.
3. "Activation point"
The current position is shown.
4. "Save activation point"
Activation points are stored with one of the
following where possible:
▷ Location.
▷ Location and street.
▷ GPS coordinates.
Using activation points
Use of activation points can be switched on
and off.
1. Press the button.
2. "Settings"
3. "GPS-based"
Displaying activation points
1. Press the button.
2. "Manage points"
A list of all activation points is shown.
Online Edition for Part no. 01405A5E758 - VI/22
Parking
Editing activation points
1. Press the button.
2. "Manage points"
A list of all activation points is shown.
3. Select an activation point if necessary.
4. Select the desired setting.
Door opening angle
Principle
Depending on the equipment, the door open-
ing angle indicator is displayed automatically.
If obstacle marking is activated, the parking
view indicates fixed obstacles that obstruct the
opening angles of the doors.
The system does not issue warnings about ap-
proaching road users.
General
Follow the information in the Chapter "Parking
assistance systems".
Display
The maximum door opening angles are dis-
played when the selector lever is in position P.
System limits
For technical reasons, the display of the vehi-
cle surroundings is distorted.
CONTROLS
223