BMW 2 Series Owner's Handbook Manual page 183

Table of Contents

Advertisement

When Dynamic Stability Control is regulat-
ing or disabled.
Directly after a steering intervention by the
vehicle systems.
With manual steering intervention.
Possibly when another driver assistance
system is activated.
Lane boundaries are not detected.
When the system limits are reached.
System limits
General
Follow the limits of the system in the chapter
"Collision warning systems".
Functional limitations
The system may have restricted functionality
in situations such as the following:
When there are missing, worn, poorly visi-
ble, merging/separating or ambiguous lane
boundaries, for example, in areas where
there are roadworks.
With lane boundaries that are covered in
snow, ice, dirt or water.
In tight corners or on narrow roads.
With lane boundaries that are not white.
With lane boundaries that are covered by
objects.
If the vehicle is too close to the vehicle
ahead.
Up to 10 seconds after switching on drive-
ready state using the Start/Stop button.
While Dynamic Stability Control is disabled.
A Check Control message may be displayed
if functionality is restricted. Depending on the
national-market version, a yellow icon is also
illuminated.
Online Edition for Part no. 01405A5E758 - VI/22
Safety
Lane Change Warning
Principle
Lane Change Warning detects vehicles in the
blind spot, or if vehicles are approaching from
behind in the adjacent lane.
The light in the exterior mirror warns in differ-
ent increments.
General
The system is operational after a minimum
speed has been reached and uses radar sen-
sors to monitor the area behind and adjacent
to the vehicle.
The minimum speed is country-specific and
displayed in the Lane Change Warning menu.
The system indicates when vehicles are in the
blind spot, arrow 1, or are approaching from
the rear in an adjacent lane, arrow 2. The light
in the exterior mirror illuminates at a dimmed
level.
In the above situations, the system issues a
warning before a lane change with the turn in-
dicator activated. The light in the exterior mir-
ror flashes and the steering wheel vibrates.
When turning at a speed of up to approx.
20 km/h/12 mph, the steering wheel will not
vibrate.
Safety information
Follow the safety information in the Chapter
"Collision warning systems".
CONTROLS
183

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents