Appliance Pairing
NETWORK
CONNECTION
Remote control
The process ends automatcially if pairing was succesfull
or after 3 minutes. Appliance can be paired to (additional)
user account. Refer to the applicaton for further instructions.
Unpair All
The process ends automatcially if UnPair was succesfull
or after 1 minute.
Remote control must be enabled to be able to control the
appliance from paired user accounts.
Appliance Pairing can be activated:
Appliance pairing on, press
Both will be blinking during pairing
Unpair All can be activated:
Appliance UnPair on, press
Are you sure? If YES, press
Remote control can be (de)activated:
Remote control on
Remote control off
Operation
to confirm
to confirm
to confirm
41