Temperature Setting; Appliance Display Standby; Key Lock Mode - Atag KA8074K1C Instructions For Use Manual

Temperature setting

Default setpoint temperature of the appliance is 12°C. This temperature can be changed instantly
in Status display, after the appliance is switched on.
Temperature of the appliance compartment can be set between: 5°C and 20°C.

Appliance Display Standby

Appliance Display Standby is a mode that display enters for optimal power consumption. Appliance
cooling system is operating normal.
Appliance Display Standby activation:
•
with a short press on On/Off key
• automatically, after a certain time of inactivity (standby time). It can be set in SETTINGS MENU.
It can not be activated in case of any errors detected and in case of opened door.
If Appliance Display Standby mode is active, it will end:
• by opening the door,
• by a short press on any key,
• when error indication is displayed on display,
• when proximity sensor detects movement, exception: if in SETTINGS MENU/ PROXIMITY AND
DOOR SENSOR/ Display changes to/ No change is selected.
When this mode ends, the appliance goes back to Status display.

Key lock mode

When Key lock mode is activated, it is not possible to switch off the appliance or to change any
setting. Appliance cooling system is operating normal. Settings can be changed only from
ConnectLife mobile application. Your preferences on proximity and door sensor, light and display
actions will be executed.
Key lock mode activation:
•
with a 3 seconds press on Key lock key
By pressing on the arrow keys, setpoint
temperature on display 'T' changes. With every
press, setpoint temperature will change 1°C
up or down. The setpoint temperature is saved
2 seconds after the last press on temp-up or
temp-down key.
When highest setpoint temperature is reached,
increasing arrow key is inactive and next press
is ignored.
Vice versa reaction occurs when lowest set
point temperature is reached.
,
,
Operation
27