Panasonic LUMIX DMC-LS2PP Service Manual page 15

Attribute Main item
SOFT CPU
Card
CPU,
ASIC hard
Operation
Zoom
• 5. How to returned to Normal Display:
Turn the power off and on, to exit from Error code display mode.
NOTE:
The error code can not be initialized.
Sub item Error code
High 4 bits Low 4 bits
Reset 3000 0001
0007
Card 3100 0001
0002
0004
3900 0005
Stop 3800 0001
0002
0100
0200
Power on 3B00 0000
Zoom 3C00 0000
3500 0000
3501 0000
3502 0000
NMI reset
| Non Mask-able Interrupt
(30000001-30000007 are caused by factors)
Card logic error
SD card data line or IC6001 (VENUS PLUS)
Card physical error
SD card data line or IC6001 (VENUS PLUS)
Write error
SD card data line or IC6001 (VENUS PLUS)
Format error
Camera task finish process time out.
Communication between Lens system and IC6001 (VENUS PLUS)
Camera task invalid code error.
IC6001 (VENUS PLUS)
File time out error in recording motion image
IC6001 (VENUS PLUS)
File data send error in recording motion image
IC6001 (VENUS PLUS)
FLASHROM processing early period of camera during movement.
I do not complete zoom lens processing
Zoom lens
I jumped into dummy processing
(0-7bit : command, 8-15bit : Status)
Though record preprocessing is necessary, it is not called.
Though record preprocessing is necessary, it is not completed.
15
Contents (Upper)
Check point (Lower)