Panasonic LUMIX DMC-LS2PP Service Manual page 10

3.4.2. INITIAL SETTINGS:
When you replace the Main PCB be sure to perform the initial settings after achieving the Adjustment, by ordering the following pro-
cedure in accordance with model suffix.
• Step 1. The temporary cancellation of factory setting:
Set the mode dial to " [ Normal picture mode ] (Red camera mark)".
While keep pressing [ Optical Image Stabilizer ] and "[ UP ] of Cross key" simultaneously, turn the Power on.
• Step 2. The cancellation of factory setting:
Set the mode dial to "[ Playback ]".
Press [ Optical Image Stabilizer ] and "[ UP ] of Cross key" simultaneously, then turn the Power off.
• Step 3. Turn the Power on:
Set the mode dial to " [ Normal picture mode ] (Red camera mark)", and then turn the Power on.
• Step 4. Display the INITIAL SETTING:
While keep pressing [ MENU ] and "[ RIGHT ] of Cross key" simultaneously, turn the Power off.
• Step 5. Set the INITIAL SETTING:
Select the area with pressing "[ UP ] / [ DOWN ] of Cross key", and then press the "[ RIGHT ] of Cross key".
The only set area is displayed, and then press the "[ RIGHT ] of Cross key" after confirmation.
(The unit is powered off automatically.)
Confirm the display of "PLEASE SET THE CLOCK" in English when the unit is turned on again.
• Step 6. CONFIRMATION:
The display shows "PLEASE SET THE CLOCK" when turn the Power on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
(When the "GT" or "GK" model suffix is selected, the display shows "PLEASE SET THE CLOCK" in Chinese.)
1) As for your reference Default setting condition is given in the following table.
• Default setting (After "INITIAL SETTINGS")
MODEL
a) DMC-LS2S
b) DMC-LS2PP
c) DMC-LS2EB/EE/EF/EG/EGM/GC/GN,
DMC-LS3EF/EG/EGM
d) DMC-LS2GK
e) DMC-LS2GT
VIDEO OUTPUT LANGUAGE
NTSC Japanese
NTSC English
PAL English
PAL Chinese (simplified)
NTSC Chinese (traditional)
10
DATE REMARKS
Year/Month/Date
Month/Date/Year
Date/Month/Year
Year/Month/Date
Year/Month/Date