Kyocera KM-6230 Quick Manual

303JV56310
Quick Guide for Scanner File Utility
This quick guide explains the methods of installing and setting the software required for Scan to PC using Scanner File
Utility. The explanation below shows the installation procedure on Windows XP. The screens may differ depending on the
version of the software.
Installing Scanner File Utility
1 Start Windows.
Close any applications that are running.
2
Insert the supplied Scanner Library CD-ROM into
the optical drive of your PC. The program starts
automatically.
If the screen shown in step 3 is not displayed,
open the CD-ROM from Windows Explorer or
My Computer and double-click setup.exe.
3
The description concerning the license agreement
is displayed. To accept the terms and conditions,
click [Accept] and proceed to the next step.
4
Click [Scanner Utilities].
5
Click [Scanner File Utility].
6
Select the desired language and click [OK].
7
Click [Next].
8
Confirm the installation folder and click [Next].
9
Select Install a desktop mode and click [Next].
For details on selecting the type of setup, refer
to the Functions Edition of the Scan System
Operation Guide.
10
Select the components to install and click [Next].
For details on selecting the components, refer
to the Functions Edition of the Scan System
Operation Guide.
11
Click [Next].
12
Click [Finish].
Registering the Destination Folder for
Scanned Images
Register a folder for storage of scanned data in
Scanner File Utility.
The explanation below shows an example when
Scan File Utility has been installed in the
desktop mode.
1 From the Start menu, click All Programs Scanner
User Software Scanner File Utility to start
Scanner File Utility.
2
Double-click the Scanner File Utility icon displayed
in the task bar to display the start dialog.
3
Click [Setup].
4
Click [New].
Revision1.0 2004.12
303JV56310
©2004 KYOCERA MITA Corporation All rights reserved.