Kyocera KM-6230 Quick Manual page 2

5
Enter the destination folder number in the No. field
and click [...].
Enter any number between 1 to 100 the
destination folder number in the No. field.
You will enter the destination folder
number entered in the No. field (001 in the
screen above) at Save Number in step 5 of the
next section, Setting the Scanner.
6
Select folder 01 and click [OK].
• Folder 01 is included in the folder in which
the programs of Scanner File Utility was
installed. By default, the folder is located at:
C:\Program Files\Kyocera\FileUtility\01.
(Depending on the version of the software,
the folder may be C:\Program
Files\Kyocera Mita\FileUtility\01.)
• Scanned images are stored in folder 01.
The destination folder can be changed.
7
Click [OK].
8
The destination folder is registered. Click [OK].
9
Click [OK].
Configuring the Scanner
Register the user in the scanner using a web
browser.
• Before proceeding, complete the network
settings for the scanner. For details, contact
your network administrator.
• The following procedures are possible while
the scanner is not in use.
1 Start a web browser such as Internet Explorer.
2
Enter the IP address of the scanner in the Address
field of the web browser. Press the Enter key on the
keyboard.
To obtain the IP address for the scanner,
contact the administrator for the scanner.
Note that the IP address for scanning is not
identical with that for printing.
3
Click [Sender List].
4
Click the number to which the sender is registered.
5
Enter Registration Name, Address of Address Book
installed PC, and Save Number.
For Address of Address Book installed PC,
enter the address of the computer in which
Scanner File Utility has been installed.
For Save Number, enter the destination
folder number (001 in the screen above)
that has been entered in the No. field in step 5
of the preceding section, Registering the
Destination Folder for Scanned Data.
6
Click [Registration].
To finalize changes or new settings made
above, be sure to click [Registration]. Failure to
do so will cancel all those changes.
When all above procedures are completed, you
can use Scan to PC feature to store the
scanned images automatically in your PC.
To store images into another PC, register the
PC in Address Editor or Address Book using a
web browser. For details, refer to the Scan
System Operation Guide, Function Edition.