Updating The Firmware - Busch-Jaeger H8131 P 03 Series Product Manual

8.1.20

Updating the firmware

Note
The outdoor station must exit engineering mode before the firmware is
upgraded.
If the gate station (device type = GS) needs to update the firmware, a gate
station (device ID =1) must be used before updating.
If the building outdoor station (device type = OS) needs to update the firmware,
a building outdoor station (device ID =1) must be used before updating.
Please follow the steps below:
[1] On the "Outdoor station settings" screen, tap "Firmware update".
Product manual 2TMD042200D0021
Commissioning
│43