Advertisement
Assembly Instructions
You may find the following items in the package:
One body frame (with the backrest pre-installed);
One seat pad;
Total of six pins, in three different sizes;
Two pieces of foams for feet support;
One wrench and hex tools.
Take them out of the package, and follow the steps below:
1. Lay the seat pad upside down on a blanket or a carpet, and remove the
pre-installed bolt from it.
2. Place the main body on the floor upside down, and install the seat pad with the
bolt which was removed in the step above.
3. Fasten the bolt using the wrench and the hex tool. You might want to turn them
in opposite directions at the same time in order to fasten the bolt.
2021-Sep
Advertisement
