Advertisement
Quick Links
FOLDABLE WEIGHT BENCH
PBWB-56
User Manual
CUSTOMER CARE
+1 (587)-328-1618
Mon. – Fri. 11 am - 5 pm MT
Sat & Sun. 11 am – 6 pm MT
Or Email:
info@probasesports.com
www.probasesports.com
CAUTION
Read all precautions and
instructions in this manual before
using this product. Save this
manual for future reference.
2021-Sep
Advertisement
Summary of Contents for PROBASE SPORTS PBWB-56
- Page 1 FOLDABLE WEIGHT BENCH PBWB-56 User Manual CUSTOMER CARE +1 (587)-328-1618 Mon. – Fri. 11 am - 5 pm MT Sat & Sun. 11 am – 6 pm MT Or Email: info@probasesports.com www.probasesports.com CAUTION Read all precautions and instructions in this manual before using this product.
-
Page 2: Important Precautions
Preface Thank for your selecting Pro Base Sports Foldable Weight Bench. For your safety and benefit, please read this manual carefully before using this product. Important Precautions Warning: To reduce the risks of injuries, read all important precautions, instructions and warnings in this manual before using this Foldable Weight Bench. Pro Base Sports assumes no responsibility for personal injury or property damage which might be caused by or through the use of this product. -
Page 3: Before You Begin
a repetition. If any defective parts are found during installation or inspection, or abnormal sound is heard during the exercises, stop using this product immediately until the problem is solved Before You Begin Please go through the drawing below and familiarize yourself with the parts as labeled. - Page 4 Assembly Instructions You may find the following items in the package: One body frame (with the backrest pre-installed); One seat pad; Total of six pins, in three different sizes; Two pieces of foams for feet support; ...
- Page 5 4. Flip the bench over. Remove the medium sized pins from under the seat pad if they were used, then lift the seat pad up and fasten the other bolts similarly. 5. Last but not least, install the foams on the feet support. 2021-Sep...
- Page 6 Adjustment You may use the pins to adjust the positions and angles of the seat pad/preacher curl pad and the backrest pad, to turn it from a weight bench into a preacher curl bench, or vice versa. There are 6 pins in total in three different sizes shown as below: Pins Quantity Function Small sized pins...
- Page 7 Bench Press mode: Insert both of the medium sized pins into the position (A), and insert the small sized pin into the position (B), as shown in Fig #1. Also, the backrest pad can be adjusted in 7 different angles using a small sized pin.
- Page 8 Folding up: Adjust the pins so the backrest and the seat pad can be placed flat against the frame. Then insert the large sized pin in position (A) in order to fasten the bench as a whole for storage. 2021-Sep...
-
Page 9: Maintenance
Maintenance Make sure that all parts are properly fastened before use. Replace any worn parts immediately. The surface of this weight bench can be cleaned with a piece of wet cloth with mild and non-abrasive detergent such as soapy water. Warning: Do not use any kind of chemical solvents or bleaches for cleaning.