Use - Haier Cube 83 User Manual

Use

Remove all packaging materials, keep them out of children`s reach and dispose
them in an environmentally friendly manner.
Clean the inside and outside of the appliance with water and a mild detergent before
putting any food in it.
After the appliance has been levelled and cleaned, wait for at least 2 hours before
connecting it to the power supply. See Section INSTALLATION.
Precool the compartments at high settings before loading with food. The functions
Super-Freeze help to cool down the compartments quickly.
The refrigerator temperature and freezer temperature are automatically set to 5° C
and -18° C respectively. These are the recommended settings. If desired, you can
change these temperatures manually. Please see MANUAL ADJUSTING MODE.
5.2 Sensor keys
The buttons on the control panel are sensor keys, which already respond when lightly
The appliance is in operation as soon as it is connected to the power supply.
Notice: Presettings
The appliance is preset to the recommended temperature of 5°C (refrigerator) and
- 18°C (freezer). Under normal ambient condition you need not to set a temperature.
The presetting function for the My Zone drawer is "Fruits and Vegetables". for the
HumidityZone drawer "High humidi t y"
When the appliance is switched on after disconnection from the main power supply, it
may take up to 12 hours for the correct temperatures to be reached.
5.4 Standby-mode
be automatically locked. It lights up automatically by touching any key or opening the door/
drawer.
16
EN