Main Screen - Ferroli Connect CRP Installation And User Manual

• Configure the type of system
Direct
MENU >> TECHNICAL >> INSTALLATION >> ZONES MANAGER >> (CHOOSE THE DESIRED ZONE)
>> HYDRAULIC CONF >> DIRECT ZONE
Mixed
MENU >> TECHNICAL >> INSTALLATION >> ZONES MANAGER >> (CHOOSE THE DESIRED ZONE)
>> HYDRAULIC CONF >> MIXING ZONE
For correct configuration (
NOTE
strictly followed.
• Change the zone name
( CHANGE NAME
MENU >> TECHNICAL >> INSTALLATION >> ZONES MANAGER >> (CHOOSE THE DESIRED ZONE)
>> CHANGE NAME
4.3

mAIN SCREEN

The main screen of the Connect CRP is divided into several areas, selectable using the
Active areas
1 System
2 MENU
4 Selected zone/Zone change
7 MODE
9 Ambient set point
11 DHW temp. set point
12 Alarm
Once an active area is selected, press the
HYDRAULIC CONF
)
T U E
2 3 / 0 7 / 1 9
M E N U
2 7 . 5
P R O G R A M A U T O
fig. 21 - main screen
button to access the relevant functions.
cod. 3542B380 - Rev 00 - 05/2022
) the hydraulic system configuration must be
C R P
M O D E
1 6 . 0 ° C
Inactive areas
3 Current day and date
5 WiFi signal strength
6 Current time
8 Current operating status
10 Running text
13 Zone temperature
and shift buttons.
1 2 : 1 9
EN
85