Hisense LMS044M6RVE User's Operation Manual page 11

Starting up and temperature
regulation
• Insert the plug of the connection lead
into the plug socket with a protective
grounding contact.
• The temperature selector knob is
located on the RH side of the refrigerator
compartment.
Setting "0" means: Off
Clockwise rotate the knob to turn on the
appliance.
Setting "1" means:
Highest temperature, warmest setting.
Setting "7" means:
Setting "7" (end-stop) means: Lowest
temperature, coldest setting.
It is recommended to use the "4"
setting. If warmer or colder
temperature is desired, please turn the
knob to a lower or higher setting.
energy
LMS044M6RVE/LMS033M6RBE/LMS033M6RVE
c -
LMS026M6RVE/LMS026M6RBE
Thermostat
knob
"7"
When the refrigerator is in use, the
compressor needs to be turned on and
off to ensure its properly defrosting.
Therefore, it is advised to avoid setting
the refrigerator's notch to high ("7"). If
the refrigerator frosts too much, make
sure to set the refrigerator's notch to a
lower setting.
Suggestion: What to do when in
use for a long period of time and
an evaporator banging sound is
heard
During use, the sound of ice cracking is
caused by thermal expansion and cold
contraction, which is a normal
phenomenon. You can manually adjust
the knob of the temperature controller
to 0, and then adjust to the appropriate
gear until there is no water bead
attached on the evaporator.
odor and mold
.
9