Cisco Catalyst 3650 Series Manual page 22

Management Options
Management Ports
Ethernet Management Port
You can connect the switch to a host such as a Windows workstation or a terminal server through the
10/100/1000 Ethernet management port or one of the console ports (see
Ethernet management port is a VPN routing/forwarding (VRF) interface and uses a RJ-45 crossover or
straight-through cable.
Table 1-15
Table 1-15
Color
Green
Blinking green
Off
RJ-45 Console Port
The RJ-45 console port connection uses the supplied RJ-45-to-DB-9 female cable.
Table 1-16
Table 1-16
Color
Green
Off
Management Options
•
•
Catalyst 3650 Switch Hardware Installation Guide
1-20
shows the Ethernet management port LED colors and their meanings.
Ethernet Management Port LED
Description
Link up but no activity.
Link up and activity.
Link down.
shows the RJ-45 console port LED colors and their meanings.
RJ-45 Console LEDs
Description
RJ-45 console port is active.
The port is not active.
Configuration Wizard
The Configuration Wizard is a Web-based controller user interface (UI) that lets you complete the
initial wireless configuration after you configure the IP address, local username, and password or
authorization using the authentication server. Using the Web UI, you can configure the controller,
WLAN, and radios for all initial operations, establish management parameters, set security policies,
access software management commands, configure system logs, and other tasks.
For more information on using the Configuration Wizard, see the switch software configuration
guide on Cisco.com.
Cisco Network Assistant
Cisco Network Assistant is a PC-based network management GUI application for LANs. You can
use the GUI to configure and manage switch clusters or standalone switches. Cisco Network
Assistant is available at no cost and can be downloaded from this URL:
http://www.cisco.com/pcgi-bin/tablebuild.pl/NetworkAssistant
Chapter 1 Product Overview
Figure 1-7). The 10/100/1000
OL-29734-01