Video Clarity RTM-1RU Manual page 6

Figure 5: RTM HD 2U Portable Back Panel (supplied with 5 SMB to BNC conversion cables)
Model: RTM-S2042
Figure 6: RTM 4K Back Panel (Supplied with two sets of Quad SMB to BNC conversion cables for
inputs 1 and 2 and mini HDMI cables for error recording playback from either or both outputs)
Models: RTM-S8084 (10 TB storage model) or RTM-8084-5 (5 TB storage model)
RTM 4K Important Notes:
4K monitoring and measurement test operation is for 3840x2160p resolution input via Quad HDSDI on
Input 1 to be compared to same frame rate and resolution on Quad HDSDI Input 2. Frame rates of
3840X2160p video supported on both inputs are 60, 59.94, 50, 30, 29.97, 25, 24, or 23.98Hz. Other
modes of operation such as IP stream decoding or file-based operation at the 4K resolution and frame
rates are not supported.
To operate RTM (regardless of model):
- Connect the included USB Keyboard and Mouse
- Connect a HDMI, DVI or VGA monitor to the system graphics output connector
- Connect signals to Input 1 and Input 2 (For file-based operation, this is not necessary)
- Connect signals for Input 1 and 2 via IP GNIC (applied up to HD or lower resolutions only) can
selected for MPEG stream decoding on Input tab in Configuration menu with same NIC or
separate NIC interfaces.
- The Output connectors are an echo output of the input (except when using the separate RTM
Player application).
The hardware specifications of each system above is detailed in the RTM
Clarity website here.
01/29/2019 Rev.3.0
datasheets or on the Video
6 of 40