Table of Contents
Advertisement
6.2.3 Output and Stream Settings
Output Module
Video Format
Image Format
Canvas Location
Custom Shift
Use Transformation
Scale Source To
De-Interlace
Rate Change
CS Coefficient
Truncate to Legal Broadcast
Values
Source Crop
Fast Mode
Program
V. Decoder
A. Decoder
01/29/2019
If greyed out you must stop RTM and also stop any preview in this
window for this to become active.
Module selected is for one of two
-
No Video Output Module: In this case the tested format is a
non-broadcast format that may not need errors to be played
back via HDSDI (or HDMI) outputs.
-
Broadcast Output Module: Select this option if the input
format is one that is a broadcast format compatible with
HDSDI as in the Video Format drop down.
Select one of the formats from the drop down menu. If the video
format is non-broadcast and not one in this dropdown menu. Open
ClearView or RTM Player (model dependent as to which you use) and
then select No Video Output Module
Predefined list if Broadcast Output module is selected. Must match
input format or if not truncation may occur. If No Video Output Module
is selected then a predefined list will populate based on defined
parameters in ClearView or RTM Player before starting RTM.
Test format location selection via drop down to be placed within
Broadcast Video Output format selected.
X defined number of pixels to shift image in canvas location to the
right from selected canvas location. Y entered number of pixels will
shift images in canvas location to the downward direction from
selected canvas location.
Checked box activates scaling function, unchecked is deactivated
Input size to scale input video resolution to new size
Takes progressive formats to interlaced format at scale resolution and
frame rate selected
Rate at which video will be recorded when faults occur and are
recorded
Selection in drop down for standard definition or high definition
standards if color space conversion is required
Truncates luma and chroma to 15 to 240 for 8 bit video
L = Number of pixel to crop from left side of picture
R = Number of pixels to crop from right side of picture
T = Number of pixels to crop from top side of picture
B = Number of pixels to crop from bottom side of picture
Automatically selects the current network filter
Selects the PID within the mux
Applied video decoder, drop down selection (may be stream
dependent at times which one of these provides best results)
Applied audio decoder should be selected depending on audio codec
in stream
Rev.3.0
18 of 40
Advertisement
Table of Contents
