Security - Kyocera Jax S1300 User Manual

Set Digit Lengths
You can set the number of digits used for a phone
number in your voice dial list.
From , select one of the
Digit lengths
following options:
recognizes only 7, 10, and
• North american
1 + 10 digits in a phone number.
allows 4-14 digits in a
• Permit all
phone number.
Enable Voice Answer
You can set your phone to answer a call with your
voice when using a hands-free accessory.
From
1. Auto answer
From
2. Ringer mode
From
3. Headset sound
.
Out of headset
From
4. Voice answer
Enable Voice Wake-up
From
• Headset sound
From
• Voice wake-up
to activate voice dialling.
Note: You must use a headset or hands-free kit
and connect the AC adapter to the phone and the
wall outlet for voice wake-up to work.
Use Voice Training
If your phone has trouble recognizing your voice,
you can train your phone to recognize specifically
your voice for numbers.
24
, select .
Disabled
, select
Normal sounds
, select
, select
With accessory
, select
Out of headset
, select
With accessory
From
1. Voice training
select
OK
Follow the prompts for each number until
2.
training is complete.
Note: You must read the numbers digit by digit
for voice training to work.
Enable Auto-Answer
From
Auto answer
phone automatically answers after five seconds
with a headset attached.
Enable Any Key
From , select one of the following:
Any key
• Any key mute
.
you press any key except for the
or
Speakerphone
• Any key answer
.
press any key except for the
Navigation
.

Security

This section describes the security features on
your phone. You can adjust these features to
prevent access to your personal information. All
security features are shielded by a four-digit lock
code (typically 0000 or the last 4 digits of your
phone number).
, read the message and
> >
Train numbers OK
, select
After 5 seconds
to silence calls when
Send
key.
to answer calls when you
,
End
key.
.
. The
, or
Back
Security