Specifications - NAD CI 9060 Service Manual

Specifications

Power Rating
85 Watts continuous average power into 6 Ohms at any frequency between 20Hz and 20kHz
with all channels driven at less than 0.03% THD.
86 Watts continuous average power into 4 Ohms at any frequency between 20Hz and 20kHz
with all channels driven at less than 0.03% THD.
IM Distortion (SMPTE)
IM Distortion (CCIF, Any Combination from 1kHz to 20kHz)
THD + Noise at 1 Watt into 6 Ohms
THD + Noise at 80 Watts into 6 Ohms
Frequency Response @ 1 Watt into 6 Ohms
Power Bandwidth (-3dB)
Gain
Amplifier Trimmer Adjustment Range
Damping Factor
Dynamic Headroom into 6 Ohms
OMC Activation
ATO Logic
Input Impedance
Input Sensitivity
Rise Time
Power Consumption (Continuous, All Channels Driven)
GENERAL
80 Watts into 6 Ohms
80 Watts into 4 Ohms
80 Watts into 6 Ohms
80 Watts into 4 Ohms
10kHz
20kHz
10kHz
20kHz
10Hz to 20kHz
SENSE Input Sensitivity
12V Trigger Input Voltage Range
12V Trigger Output Current
80 Watt into 6 Ohms
1 Watt into 6 Ohms
Damping Factor 20Hz to 20kHz
5kHz, 50V peak-to-peak square wave,
20% to 80%
Quiescent
Maximum
80 Watts into 6 Ohms
80 Watts into 4 Ohms
Power (available in 240V)
Ambient Operating Temperature
Operating Temperature
Ventilation Air Flow
Net Chassis Dimensions
Maximum Gross Dimensions
Weight CI 9060, Packed
Weight CI 9120, Packed
< 0.03 %
< 0.03 %
< 0.03 %
< 0.03 %
20Hz 0.03 %
1kHz 0.03 %
0.03 %
0.03 %
20Hz 0.03 %
1kHz 0.03 %
0.03 %
0.03 %
+ 0.5, -1.0dB
5Hz to 45kHz
28dB
14 ± 2 dB
>30
1.6dB
< 3 Ohms across any speaker terminal
>10mV rms
10.0V to 20.0V DC, 100k Ohms
25 ± 5mA, 470 Ohms
25k Ohms
1V rms
114mV rms
>31
4 µs
84/168VA
960/1920VA
744/1488VA
900/1800VA
120VAC/50-60Hz
< 100 °F (40 °C)
68 °F (20 °C)
above ambient temperature
150 cubic feet/minute maximum
17.2x5.3x17.8 inches (437x133x451 mm)
or 3 rack heights
18.9x19.0x5.7 inches (480.1x481.7x144.8 mm)
(includes rack mounting hardware,
feet and speaker terminals)
58 lb (26.4 Kg), 68 lb (31 Kg)
80 lb (36.5 Kg), 90 lb (41 Kg)