For your information... Be sure to read the information in this manual carefully before you install the oven. Please keep this manual in a safe place and pass it on to future owners for their information and safety. The following symbols are used in this operating manual: The warning triangle will alert you about possible health risks or things that can cause potential damage to your appliance.
Installation requirements The oven must be placed on a board that can support a minimum of 62.5 140 lb. The oven is placed in direct contact with the side walls of the openi with the frame overlapping these side walls.
120 / 240 volts system, 3-wire with ground: „C“ 84 mm 3-5/16“ Be sure to install an appropriate conduit box (not furnished) to connect the oven. 63 mm 2-1/2“ Don’t shorten the conduit to facilitate service! The conduit should be routed 80 mm 3-1/8“...
Page 5
glide-out shelves (acc.-no. 601) – Unscrew the side grids. These screws are used to fasten the individual telescopic glide-out shelves. – Insert the individual telescopic glide-out shelves at the back into the holes in the intermediate wall and screw the individual telescopic glide- out shelves at the bottom front to the side walls.
Page 8
ÜPPERSBUSCH 112 N. East Street, Suite C Tampa, Florida 33602 Telephone: 813-229-7096 Fax: 813-229-0982 Customer Care line: 1 - 800 - 459 - 0844 www.kuppersbuschusa.com is a brand of Teka USA, Inc. ÜPPERSBUSCH...