Emagra TAU Assembly Instructions

Used parts
(Note: Some parts may be different than images)
1. Headrest 2. Backrest
3. Seat+mechanism+armrests
4. Base 5. Gaslift 6. Casters
7. Screws
Model TAU
A M8x40 3 pcs Backrest
1 pcs IMBUS
Assembly instructions – model TAU
www.emagra.cz/cs/m-391-kancelarska-zidle-tau
STEP 1
1. Take the seat out of the box
2. Take the backrest out of the box
3. Remove headrest, gaslift, base, casters, screws (1,4,5,6,7)
STEP 3
1. Insert 5pcs of
casters into the
base, then
insert gaslift
into the
opening in the
base
2. Insert the
gaslift into the
corresponding
hole in the
mechanism
STEP 4
1. Fasten
headrest to
the backrest
a) Put on b) Click in
c) Slide d) Finished
down
STEP 2
1. Fasten backrest to
the mechanism
2. Tighten the screws
A- 3 pcs to a metal
plate which attaches to
the lower part of the
backrest
User guide
Maintenance and attention
1. The chair can only be used by
one person at a time.
2. Do not use the chair as a stool
or ladder.
3.Do not use the chair unless all
parts are properly assembled.
4.Do not use the chair untill all
screws are properly tightened.
5. If the chair is damaged by
external influences, do not use it
without expert repair.
6. For professional servis, please
contact us by phone +420 463 034
155, or by mail
export1@emagra.cz