KING Jack OA8300 Manual

Amplified hdtv antenna

STEP 1

STEP 1:

Verify all components and parts are included.

STEP 2:

STEP 2

Install the KING Jack Antenna in one of two ways (page 2):

• RV Mounting: Mount to a bat wing style retractable arm using the supplied RV Antenna Bracket.

• Pole Mounting: Mount to a stationary pole (on a house for example) using the supplied Pole Mount

STEP 3:

READ THE FOLLOWING INFORMATION CAREFULLY, THEN CHOOSE A CONNECTION OPTION

STEP 3

ON PAGE 3 AND MAKE CONNECTIONS.

When using an existing power injector already in the RV

When using the KING Jack antenna with the supplied power injector

STEP 4:

STEP 4

Read the OPERATING INSTRUCTIONS on page 4 for antenna pointing instructions.

Model OA8300

Reception Frequencies

Bracket. DO NOT MOUNT TO A POLE ON A VEHICLE.

WARNING: DO NOT USE BOTH POWER INJECTORS!

existing RV antenna will be a wall

plate or an A/V distribution box with

an ON/OFF type switch.

Power Supply

Table of Contents

Need help?

Do you have a question about the OA8300 and is the answer not in the manual?

Page 1 STEP 2: STEP 2 Install the KING Jack Antenna in one of two ways (page 2): • RV Mounting: Mount to a bat wing style retractable arm using the supplied RV Antenna Bracket. • Pole Mounting: Mount to a stationary pole (on a house for example) using the supplied Pole Mount Bracket.
Page 2 Option 1: BAT WING STYLE REPLACEMENT 2. Attach the RV antenna bracket to the KING Jack antenna with the 4 supplied screws. clips (use new supplied retaining clips if necessary). You must mount antenna in relation to poles as shown below.
Page 3 Page 3...
Page 4 Antenna pointed in wrong direction. IMPORTANT! Do not power wash any part of the KING Jack antenna. LIMITED WARRANTY of replacement parts after one year. • Circumstances beyond the control of KING cause the product to no longer operate correctly.