Hyundai SANTA FE HYBRID 2021 Manual page 24

Foreword / Hybrid System Overview
Information
Charging connector AUTO/LOCK mode
The charging connector is locked in the
inlet at a different period according to
which mode is selected.
LOCK mode : The connector locks
when the charging connector is plugged
into the charging inlet.
AUTO mode : The connector locks
when charging starts.
For more details, refer to "Charging
Connector AUTO/ LOCK Mode" in this
chapter.
8. Charging starts automatically
(charging lamp blinks).
1-24
Type A
9. Check if the charging indicator
light of the high voltage battery
on the instrument cluster is turned
ON. Charging is not done when the
charging indicator lamp is OFF.
When the charging connector is not
connected properly, reconnect the
charging cable to charge it again.
Even though charging is possible with
the ignition switch in the ON/START
position, for your safety, start charging
when the ignition switch is in the
LOCK/OFF position and the vehicle
shifted to P (Park).
OOSEVQ018057
After charging has started, you can use
electrical components such as the radio
by placing the ignition switch in ACC
or ON position.
Moving the shift lever from P (Park) to
R (Reverse)/N(Neutral)/D (Drive) stops
the charging process.
To restart the charging process, move
the shift lever to P (Park), place the
ignition switch to the LOCK/OFF
position, and disconnect the charging
cable. Then, connect the charging cable.
Type B
OTMPHQ010007L
Information
OTMPHQ010008L