Hyundai SANTA FE HYBRID 2021 Manual page 17

4. Check if there is dust on the charging
connector and charging inlet.
5. Hold the charging connector handle
and connect it to the vehicle AC
charging inlet. Push the connector
until you hear a "clicking" sound. If
the charging connector and charging
terminal are not connected properly,
this may cause a fire.
Information
Charging connector AUTO/LOCK mode
The charging connector is locked in the
inlet at a different period according to
which mode is selected.
LOCK mode : The connector locks
when the charging connector is plugged
into the charging inlet.
AUTO mode : The connector locks
when charging starts.
For more details, refer to "Charging
Connector AUTO/ LOCK Mode" in this
chapter.
6. Connect the charging plug to the
OTMPHQ010006L
7. Check if the charging indicator
AC Charger
electric outlet at a AC charging station
to start charging.
Type A
OTMPHQ010007L
light of the high voltage battery
on the instrument cluster is turned
ON. Charging is not done when the
charging indicator lamp is OFF.
When the charging connector and
charging plug are not connected
properly, reconnect the charging
cable to charge.
01
OLFP0Q5007K
Type B
OTMPHQ010008L
1-17