Removing And Fitting Filter Silencer Or Air Suction Branch - ABB HT564330 Operation Manual

8.3
8.3
Installing the air suction
branch
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Removing and fitting filter silencer or air
suction branch
Removing and fitting filter silencer or air
suction branch
Disconnect all air lines / ducts in accordance with engine builder's

instructions.
Remove the insulation where necessary.

Loop the lifting gear around the air suction branch.

Unscrew the nuts (74027) and remove them together with their

washers (74018).
Remove the air suction branch and set it down to one side.

Install the air suction branch in reverse order.

Operation Manual / TPL76-C
8
8.3 Page 93