Table of Contents
Advertisement
WARNING
Clearance A [mm]
CAUTION
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Installing cartridge group
Measuring and checking axial clearance
Risk of injury due to sharp edges on the compressor wheel
The compressor wheel has sharp edges which can cause injuries.
Wear safety gloves.
Wear safety gloves against mechanical risks.
Measure and note axial clearance A.
If the axial clearance (A) is out of tolerance, an official ABB Turbo
Systems service station must be contacted.
Connect oil lines and all air lines in accordance with engine builder
specifications.
Fit filter silencer or air suction branch and fasten with nuts (74027) and
washers (74018).
Refit insulation if it was removed.
Operation Manual / TPL76-C
8
8.7
TPL76-C
0.43 ... 0.69
Page 116
Advertisement
Table of Contents
