CAUTION
NOTICE
Check dimension (s) [mm]
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Installing cartridge group
Engaging safety elements / securing casing
Locked safety segments (76080) during assembly
The safety segments (76080) are not in the operating position.
Additional axial securing of the two compressor casings (74000/76000)
is not guaranteed.
Fit four nuts (74027) complete with washers (74018), equally spaced
around circumference, and tighten.
Unscrew nuts (90458) on threaded studs of safety segments (76080)
on internal part of compressor casing (76000).
The internal part of the compressor casing (76000) is now secure relative
to the external part (74000).
Note the control dimension (s). The safety segments (76080) are in the
operating condition again ("engaged").
Dimension
s
Put nuts (90458) back into toolbox.
Operation Manual / TPL76-C
8
8.7
TPL76-C
16.5
Page 115