Gainscha GE-2408D Series User Manual page 23

close the printer cover
C. Press FEED buttons then turn on the printer's
power. When the online Green and the error Red are
on at the same time, release FEED buttons, when you
hear a beep, the printer enters the dump mode and
will print out "NOW IN DUMP MODE".
Skip A. Power off the printer
AUTO.BAS B. Press the FEED button, and turn on the printer.
When the online Green is on, release FEED button,
when you hear beep, the printer will skip the
AUTO.BAS program
Printer A. Power off the printer
initialization B. Press the FEED button, and turn on the printer.
When the online red is on, release FEED button,
when you hear five beeps are heard. At this time the
printer will restore the printer parameters to the
factory default settings.
Ribbon The machine will automatically detect the status of
inspection the ribbon after turning on and in each thermal
transfer printing mode.
20
light+Red
light
White
light+Green
light
White
light+red
light