Table of Contents
Advertisement
Operating Instructions
6. Trouble Shooting
In case LED 1 should not light up even during a highest sensitivity being set (potentiometer P1 turned
all the way to the right and switch S2 set to position 2) when there is material between transmitter and
receiver, there is a possibility that, due to
the position of the installation locations in relation to each other
•
the position of transmitter in relation to receiver or
•
too great a distance between transmitter and receiver,
•
the maximum detection range is limited.
7. Notice
Avoid reflections on metal parts.
•
8. Declaration of Conformity
The described product meets the requirements of the following European directives:
Number:
89/336/EEC
Text:
Electromagnetic compatibility
The accordance of the described product with the regulations of Directive No. 89/336/EEC is
demonstrated by the complete compliance with the following standards:
Reference number
DIN EN 55011
DIN EN 61000-1
DIN EN 61000-3-2
DIN EN 61000-3-3
Issue date
Reference number
2007
DIN EN 61000-4-3
DIN EN 61000-6-1
2001
DIN EN 61000-6-2
2001
DIN EN 61000-6-3
Issue date
1997
2002
2000
2002
9
Advertisement
Table of Contents
