6.8.1 Auxiliary Functions...... 27 Table of Contents 6.8.2 Functions/Programmes Selec- 1 Safety Instructions ......ted by Pressing the Function Intended Use ........ Keys for 3 Seconds ....Safety of Children, Vulnerable Per- End Time ........29 sons and Pets ......6.10 Starting the Programme....
Page 3
Please read this user manual first! Dear Customer, Thank you for choosing Cylinda product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents care- fully before using the product.
1 Safety Instructions This section includes the safety • The product must only be instructions necessary to pre- used for washing and rinsing vent the risk of personal injury or of laundry that are marked ac- material damage. cordingly • This appliance is intended to Our company shall not be held be used in household and responsible for damages that...
ing use of the appliance in a • Cut the power cable and the product safe way and the break and deactivate the lock- hazards involved. ing mechanism of the loading • Children under the age of 3 door before disposing of the should be kept away unless product for children’s safety.
• When unplugging the appli- Installation Safety ance, don't hold the power • Check the information on the cord, but the plug. manual and installation in- • Make sure the plug is not wet, structions to prepare the dirty or dusty. product for installation and Handling Safety make sure the electrical...
Page 7
• Place the product on a level be running from the tap in a and hard surface and balance minute in order for the product with the adjustable legs. to function properly. If the wa- • Connect the product to a ter pressure is above 1 MPa grounding plug protected by a (10 Bars), a pressure-reducing...
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
charge hose is connected to • Do not use sharp or abrasive the tap. Do not touch the dis- tools to clean the product. Do charge water. not use household cleaners, • Take the following precautions soap, detergent, gas, gasol- to prevent formation of biofilm ine, thinner, alcohol, varnish, and malodours:...
2 Important Instructions for Environment 2.1 Compliance with WEEE Direct- This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE). This product has been manu- factured with high quality parts and materials which can be reused and are suitable for re- cycling.
4 Installation 4.1 Appropriate Installation Loca- Please read the “Safety Instructions” tion section first! • Place the product on a hard and level Your washing machine automatically floor. Do not place it onto a carpet with detects the amount of laundry high pile or other similar surfaces.
Tilt the machine back slightly. Rest the tabs NOTICE of Cover A against the lower panel. Com- Remove the transportation safety plete the assembly by rotating the cover. bolts before operating the product. • Cover B and the Cap are optional. If avail- Otherwise, the product will get dam- able, attach cover B and the Cap.
e. The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the product. Otherwise, water dis- charge issues may emerge. f. If the length of the hose is too short, use it by adding an original extension hose.
• Connection must comply with national 4.8 Start Up regulations. Before starting to use the product make sure • The electrical connection cable infrastruc- that the preparations described in section ture of the product must be adequate and “Environmental instructions” and “Installa- suitable for product requirements.
• Wash trousers and delicate laundry turned not open, apply the solutions provided for inside out. “Loading door cannot be opened” error in • Laundry that are subjected to materials the Troubleshooting section. such as flour, lime dust, milk powder, etc. 5.5 Correct Load Capacity intensely must be shaken off before pla- cing into the product.
Page 17
( ) a syphon piece in the softener compart- Only detergents, softeners and ad- ment, ditives suitable for washing ma- ) there is a liquid detergent apparatus for chines should be used. liquid detergent use in the main washing Do not use soap powder. compartment.
Using Anti-Limescale • When necessary, only use anti-limescale produced for washing machines. Using Bleach and Decolourants • Select a programme with pre-washing and add bleach at the start of pre-washing. Do not put detergent in the pre-wash com- partment. As an alternative application, se- Use of Gel and Tablet Detergents lect a programme with additional rinsing •...
It may be necessary to Powder and liquid deter- pre-treat the stains or per- gents recommended for form prewash. colours can be used at Prefer liquid deter- dosages recommended Liquid detergents Powder and liquid deter- gents produced for heavily soiled clothes. suitable for colours gents recommended for for delicate...
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration information 4 Door lock is engaged symbol 5 Programme follow-up indicator 6 No Water indicator 7 Delayed Start Enabled Indicator 8 Auxiliary Function Indicators 3 9 Child Lock Enabled symbol 10 Auxiliary Function Indicators 2 11 Auxiliary Function Indicators 1 12 No spin indicator...
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine while The auxiliary functions in the table selecting a programme. Depending may vary according to the model of on the amount of laundry you have your machine.
• Syntet Programmes are limited with the You can wash your laundry (such as shirts, highest spin speed appropriate for that particular type of fabric. blouses, synthetic/cotton blended fabrics etc.) in this programme. When the quick When selecting a programme, al- wash function button is pressed, the pro- ways consider the type of fabric, col- gramme duration will be shortened signific-...
washing more than 6 shirts, there may be Do not load more than 1 double fibre differences on the wrinkle levels and humid- duvet (200 x 200 cm). ity on shirts at the end of cycle. Do not wash your duvets, pillows and etc.
• Grovtvätt / Fläckar 6.6 Temperature Selection The machine has a special stain programme which enables the removal of different types of stains in the most effective way. Use this programme only for durable colourfast cot- ton laundry. Do not wash delicate and pig- menting clothes and laundry in this pro- gramme.
Press the Spin Speed Adjustment button to 6.8 Auxiliary Function Selection change the spin speed. Spin speed de- creases gradually. Then, depending on the model of the product, "Rinse Hold " and "No Spin " options appear on the display. Select the desired auxiliary functions before If you are not going to unload your laundry starting the programme.
Depending on the programme selection, the 6.8.2 Functions/Programmes Se- Intensive feature can be selected automatic- lected by Pressing the Func- ally. In this case, the Intensive LED on the tion Keys for 3 Seconds panel will be lit. You can use the Intensive selection to achieve a better washing per- •...
With the End Time function, the end time of You can switch on and off the ma- the programme may be set up to 24 hours. chine with On / Off button when the After pressing End Time button, the pro- Child Lock is active.
6.10 Starting the Programme a. Press Start / Pause button to start the programme. b. The Start / Pause button's light which was off before starts to illuminate steadily now, indicating that the programme has c. Pull down the loading door emergency started.
If the water level in the machine is not suit- The loading door will not open if the able when you press Start/Pause button, the water temperature in the machine is door lock cannot be deactivated and the high or the water level is above the door lock icon on the display remains on.
Clean the syphon if excess amounts of water If the holes on the door gasket shown in the and fabric softener mixture remains in the figure is blocked, open the holes using a softener compartment. toothpick. Foreign metal substances will cause rust stains in the drum.
propriate brush. If the filters are too dirty, Temperature of the water inside the remove them from their places with a pli- product may rise up to 90 ºC. To ers and clean in this way. avoid the risk of scalding, clean the filter after the water inside the c.
8 Troubleshooting Product vibrates or makes noise. Please read the “Safety Instructions” • Product is standing unbalanced. >>> Ad- section first! just the stands to balance the product. • A hard substance has entered into the Programmes do not start after the load- pump filter.
Page 35
• Product is heating up the water or it is at • Timer may stop during heating step. >>> the spinning cycle. >>> Wait until the pro- Timer indicator will not countdown until the gramme completes. product reaches the selected temperature. •...
Page 36
• Excessive amount of detergent is used. • Detergent in use is damp. >>> Keep de- >>> Use the recommended amount of de- tergents closed in an environment free of tergent appropriate for water hardness humidity and do not expose them to ex- and the laundry.
Page 37
Laundry does not smell like the • Excessive amount of detergent is used. softener. (**) >>> Use only sufficient amount of deter- gent. • Detergent was put in the wrong compart- • Detergent was stored under improper ment. >>> If detergent is put in the pre- conditions.
“Self-Repair” section below, repairs shall be www.cylinda.se/support , might give raise to addressed to registered professional re- safety issues not attributable to Cylinda , and pairers in order to avoid safety issues. A re- will void the warranty of the product.
Page 40
Service Nationwide service in Sweden Visit www.cylinda.se Call 0771-25 25 00 Declare Model code Serial number Purchase date Problem description Name and address Phone number Contact us www.cylinda.se 2820530214/ EN/ / 28/05/2022 20:06...
Need help?
Do you have a question about the FT6196A and is the answer not in the manual?
Questions and answers