Control Panel........20 Table of Contents Symbols on the Display ....21 1 Safety Instructions......Programme and Consumption Intended Use........Table ..........Safety of Children, Vulnerable Programme Selection....24 Persons and Pets ......Programmes ........24 Electrical Safety......Temperature Selection ....27 Handling Safety ......
Page 3
Please read this user manual first! Dear Customer, Thank you for choosing Cylinda product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
1 Safety Instructions This section includes the safety • This appliance is intended to instructions necessary to pre- be used in household and sim- vent the risk of personal injury or ilar applications. For example; material damage. – Personnel kitchens of stores, Our company shall not be held offices and other work envir- responsible for damages that...
• Electrical products are danger- • If the power cable is damaged, ous for children and pets. Chil- it must be replaced by the au- dren or pets should not play thorised service in order to with, climb on top or inside the avoid possible risks.
• The product is heavy, do not • Check for any damage on the move alone. Do not hold ex- product before installing it. Do truding parts such as the laun- not have the product installed dry loading door to lift and if it is damaged.
• Do not plug the product to • If a drier is to be placed on the loose, broken, dirty, greasy product, fix with a suitable con- sockets or sockets that has nection apparatus obtained come out their seats or sock- from the authorised service.
• Unplug the product and turn • Do not place your hand or a off the tap if you will not be us- metal object under the wash- ing the product for long peri- ing machine. ods. • If washing laundry at high tem- •...
• Do not use sharp or abrasive • There may be detergent tools to clean the product. Do residues in the detergent not use household cleaners, drawer when you open it for soap, detergent, gas, gasoline, cleaning. thinner, alcohol, varnish, etc. •...
4 Installation 4.1 Appropriate Installation Location Please read the “Safety Instruc- tions” section first! • Place the product on a hard and level floor. Do not place it onto a carpet with Your washing machine automatic- high pile or other similar surfaces. Inap- ally detects the amount of laundry propriate floor may cause problems of placed inside when selecting a pro-...
• Cover B and the Cap are optional. If avail- NOTICE able, attach cover B and the Cap. Keep the transportation safety bolts in a safe place to reuse when Cover B the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disas- sembly procedure.
4.5 Connecting the Drain Hose to the leaks, always secure the connection between the extension hose and the Drain draining hose of the product with a suit- 1. Attach the end of the drain hose directly able clamp so that it does not come off to waste water drain, washbasin or and cause leaks.
• If the current supply to the fuse or stallation”. To prepare the product for breaker in the house is less than 16 washing laundry, perform first operation in Amps, have a qualified electrician install Drum Cleaning programme. If this pro- a 16 amp supply.
powders on the laundry may build up on The product automatically adjusts the wa- the inner parts of the product in time and ter amount according to the weight of the can cause damage. laundry put inside it. 5.3 Tips for Energy and Water Saving Follow the instructions in “Pro- gramme and consumption table”.
• Prewash compartment and prewash op- tion is not available. Choosing the Detergent type Detergent type to be used depends on the washing programme, fabric type and col- our. • Use different detergents for coloured and white laundry. • Wash your delicate clothes only with spe- cial detergents (liquid detergent, wool shampoo, etc.) intended solely for delic- ate clothes and at suggested pro-...
5.6.2 Dosage Selections, Cancellation or Use of Powder Detergent Liquid detergent cannot be selected in We recommend filling the detergent com- some of the programmes. Powder deter- gent must be used in these cases. For partment with liquid detergents that can be more information, see Programme Table.
5.6.3 Detergent and/or Softener Run- will turn off. If the softener symbol is not lit, it means that softener will not be used in the ning Out rinsing step. When the detergent or the softener put in- When you press the Automatic Dosing key for side the detergent drawer finishes, the the second time, the powder detergent and the dosage symbol in the display flashes.
Powder and liquid deter- It may be necessary to gents recommended for pre-treat the stains or per- colours can be used at form prewash. dosages recommended Prefer liquid deter- Liquid detergents Powder and liquid deter- for heavily soiled gents produced suitable for colours gents recommended for clothes.
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration information 4 Door lock is engaged symbol 5 Programme follow-up indicator 6 No Water indicator 7 Add Garment Indicator 8 Bluetooth Connection Indicator 9 Remote Control Indicator 10 Delayed Start Enabled Indicator 11 Auxiliary Function Indicators 3 12 Child Lock Enabled symbol...
Page 23
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine The auxiliary functions in the table while selecting a programme. De- may vary according to the model of pending on the amount of laundry your machine.
6.4 Programme Selection but effective washing performance is en- sured with intense washing movements. If 1. Determine the programme suitable for the quick wash function is not selected, ef- the type, quantity and soiling level of the fective washing and rinsing performance is laundry in accordance with "Programme ensured for your heavily soiled laundry.
Page 25
machine. Load the duvet into the machine programme to help the wrinkle reducing while paying attention that it will not con- function. The special spin profile and tact the door gasket or the glass. steam applied at the end of the programme reduce the wrinkles on your shirts.
Page 26
• Delicate programme for which duration of rinse hold, washing action, washing and rinsing You can wash your delicate clothes such as duration are modified. cotton/synthetic blended knitwear or ho- siery in this programme. It washes with Below you can find the soil groups that more delicate washing action.
• Towel Whenever a new programme is selected, the recommended spin speed of the selec- Use this programme to wash durable cot- ted programme is displayed on the Spin ton laundry such as towels. Load the tow- Speed indicator. It is possible that the re- els into the machine paying attention to commended spin speed value is not the place them in a way that they will not con-...
without spinning your laundry. Programme When an auxiliary function button will resume and complete after draining the that cannot be selected with the water. current programme is pressed, the If you want to spin the laundry held in wa- washing machine will make a warn- ter, adjust the Spin Speed and press Start/ ing sound.
Use the Quick Wash button for Mildly and • Automatic Dosage Setting Lightly soiled laundry and shorten the pro- This function can only be used with the gramme duration. HomeWhiz application. With this function, the dosing amounts of the Liquid Detergent •...
laundry from creasing at the end of the pro- To activate bluetooth connection: gramme. You can cancel the programme Press and hold Remote Control function and take your laundry out at any time dur- button for 3 seconds. Countdown “3-2-1” ing the 8-hour duration.
4. Press Start / Pause. Time countdown After a certain period when the end starts. time function is activated, the ma- chine switches to stand-by mode Additional laundry can be added and some LEDs on the display are into the machine during the End turned off.
If the Remote Control Function is selected, the door will be locked. In order to open the door you must de- activate Remote Start Function by either pressing the Remote Start button or changing the programme position. Opening the loading door in case of power failure: 6.12 Changing the Selections After In case of power failure, you can...
Switching the machine to pause mode: If you turn the programme selection Press the Start/Pause button to switch the knob when the Child Lock is en- machine to pause mode. Pause symbol will abled, the programme will not be flash on the display. cancelled.
You can touch the “Appliances” tab in the 1. If you are adding a device for the first HomeWhiz application to view appliances time, touch “Appliances” tab on the paired with your account. Following the in- HomeWhiz Application. Select “ADD AP- stallation of the application, HomeWhiz PLIANCE”...
If you cannot successfully perform the setup within 5 minutes, your washing machine will turn off auto- matically In this case, you will have to start over the setup procedure. If the problem persists contact the Authorised Service Agent. You can use your washing machine with more than one smart appli- HomeWhiz Application may require ance.
6.15.3 Remote Control Function and ing the front door. Once access is estab- lished to the product, you will see a screen Using It similar to the one below. Bluetooth is automatically turned on after setting up HomeWhiz. To activate or deac- tivate the Bluetooth connection, please see Bluetooth 3’’’.
2. Restart the product application. 4. If the connection cannot be established with the above processes, repeat the ini- 3. Turn bluetooth off and then on via user tial set-up settings on the washing ma- control panel. chine. If the problem persists, consult an Author- ised Service Agent.
7.2 Cleaning the Loading Door and the Drum For products with drum cleaning pro- gramme, please see the Operating the 2. Remove the drain stick located at the product section. back of the drawer from its slot. Repeat Drum Cleaning process in 3.
7.4 Cleaning the Water Intake Filters NOTICE: Foreign substances left in the There is a filter at the end of each water in- pump filter may damage your take valve at the rear of the product and product or may cause noise prob- also at the end of each water intake hose lem.
the end of the hose with the plug. Drain 2. Replace the filter. all water by repeating the procedure spe- 3. If the filter cap is composed of two cified above after draining the container. pieces, close the filter cap by pressing •...
Page 41
• Pump filter is clogged. >>> Clean the • Input temperature of water is low. >>> pump filter. Required time to heat up the water ex- tends in cold seasons. Also, washing Product stopped shortly after the pro- time can be lengthened to avoid poor gramme started.
Page 42
• The product will not spin if water is not • Wrong type of detergent is used. >>> Use drained completely. >>> Check the filter original detergent appropriate for the and the draining hose. product. • Excessive foam has occurred and auto- •...
Page 43
take this detergent during rinsing or • Detergent has gotten damp. >>> Keep de- softener step. Put the detergent in the tergents closed in an environment free of correct compartment. humidity and do not expose them to ex- • Pump filter is clogged. >>> Check the fil- cessive temperatures.
Therefore, please be advised that end-users refrain from the attempt to carry repairs by professional repairers (who are not authorized by Cylinda ) shall void out repairs falling outside the mentioned list of spare parts, contacting in such cases the guarantee.
Page 45
gistered professional repairers. On the con- trary, such attempts by end-users may cause safety issues and damage the product and subsequently cause fire, flood, electrocution and serious personal injury to occur. By way of example, but not limited to, the following repairs must be addressed to au- thorized professional repairers or re- gistered professional repairers: motor,...
Page 48
Service Nationwide service in Sweden Visit www.cylinda.se Call 0771-25 25 00 Declare Model code Serial number Purchase date Problem description Name and address Phone number Contact us www.cylinda.se 2820530233/ EN / 20/12/2022 08:50...
Need help?
Do you have a question about the FTA6396A and is the answer not in the manual?
Questions and answers