Download
Share
Print this page
ABSCO SHEDS MB60303HK Manual
  1. Manuals
  2. Brands
  3. ABSCO SHEDS Manuals
  4. Storage
  5. MB60303HK
  6. Manual

ABSCO SHEDS MB60303HK Manual

Highlander shed
Hide thumbs

Advertisement

Quick Links

Download this manual
AU: 1800 029 701
N Z: 0800 466 444
For construction in non-cyclonic areas
Wind rating: N2 as per AS4055-2021.
If you require a higher wind rating please contact
us: admin@absco.com.au or 1800 029 701
NOTE: This shed can be upgraded to wind
rating: C1 as per AS4055-2021 with the additional
purchase of a Cyclone Kit.
DOWNLOAD
OUR APP FOR
ASSEMBLY
VIDEOS
Absco Industries
Assembly Instruction Manual
ABSCO HIGHLANDER SHED
MODEL: 60303HK
5.96mW x 3.00mD x 2.30mH
admin@absco.com.au
www.abscosheds.com.au
WHEN LAYING YOUR CONCRETE
SLAB, ENSURE THERE IS A
REBATED EDGE 25mm DEEP
AROUND THE PERIMETER
THIS WILL HELP WATER EGRESS
FROM THE BASE OF THE SHED
We thank you for choosing an Australian made
shed. For further assistance please visit our detailed
instructional video library at
Http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be
number ONE, so please let us know what you think
of our instructions. Feedback makes us better.
feedback@absco.com.au
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION MANUAL
Absco Industries
Premier Shed Model: 23151GK
When laying concrete slab, ensure there
is a rebated edge 25mm deep around
the perimeter. This will help water egress
from the base of the shed.
PLEASE LEAVE A REVIEW
SHED MODEL: 23151GK
Tell us about your experience!
Visit www.abscosheds.com.au/review
Model: 60303HK
29/11/2021
FRONT: 2.26m
SIDE:
1.52m
HEIGHT: 1.95m
BOTTOM CHANNEL
REBATED EDGE
75mm WIDE REBATE
CONCRETE SLAB
21-11-2017
1.4
PAGE 01
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the MB60303HK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ABSCO SHEDS MB60303HK

Summary of Contents for ABSCO SHEDS MB60303HK

  • Page 1 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH AU: 1800 029 701 admin@absco.com.au N Z: 0800 466 444 www.abscosheds.com.au Absco Industries Premier Shed Model: 23151GK FRONT: 2.26m SIDE: 1.52m HEIGHT: 1.95m WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 25mm DEEP AROUND THE PERIMETER BOTTOM CHANNEL...
  • Page 2 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH GENERAL INSTRUCTIONS • Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details. • Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on "COMPONENTS PACKING LIST"...
  • Page 3 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH COMPONENT PACKING LIST Check off all components. Packed in TWO large cartons. MAIN PACK CARTON (PACK 1 OF 2) COMPONENT PART COMPONENT PART CHECK CHECK DESCRIPTION DESCRIPTION GABLE L/H STEEL SHEET L=1475mm 1974mm X 773mm GABLE R/H...
  • Page 4 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH COMPONENT PACKING LIST CHANNEL SET PART COMPONENT PART COMPONENT CHECK CHECK DESCRIPTION DESCRIPTION 55AL 55AR CHANNEL CHANNEL L = 1496.5mm L = 1496.5mm 55BL 55BR CHANNEL CHANNEL L = 1496.5mm L = 1496.5mm 55CL 55CR...
  • Page 5 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH COMPONENT PACKING LIST CHANNEL SET (CONT.) COMPONENT PART COMPONENT PART CHECK CHECK DESCRIPTION DESCRIPTION Part No. Here CHANNEL WITH HINGES JAMB L= 2034mm L = 1974mm Part No. Here CHANNEL JAMB L= 2034mm L = 1974mm Part No.
  • Page 6 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH COMPONENT PACKING LIST FITTINGS & ACCESSORIES PACKET CONTENTS PART COMPONENT PART COMPONENT CHECK CHECK DESCRIPTION DESCRIPTION DOUBLE DOOR KIT (SEE BELOW) ASSEMBLY INSTRUCTION MANUAL SINGLE DOOR KIT (SEE OVER) HEX HD CAP GABLE TEK SCREW W/ NEO L: 170mm...
  • Page 7 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH COMPONENT PACKING LIST SINGLE DOOR KIT PACKET CONTENTS DOOR PADBOLT DOOR HASP PADBOLT 3.2 x 8mm SELF TAPPING SCREWS BLIND POP RIVETS PACKET CONTAINING 220 3/16 COUNTERSUNK SCREWS & NUTS MAIN PACK CARTON (PACK 2 OF 2) PART COMPONENT...
  • Page 8 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel. Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet.
  • Page 9 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH Guide on Joining Spliced Channels The text marked on all parts must be shown on the same side as each other JOIN>> JOIN>> <<JOIN JOIN>> Step 1. Step 2. Position the channels and the Join the fi rst channel to the CSJ Push down one side of the CSJ CSJ joiner so the centre of...
  • Page 10 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH PRE-ASSEMBLY OF SPLICED CHANNELS Join together 40 x channel sections using 20 x channel joiners (Part CSJ) NOTE: Some channels may have holes in them - You will need to redrill holes where CSJ joining channel covers them.
  • Page 11 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH Guide on Joining a Spliced Ridge Beam Follow these three steps to assemble a ridge beam. ZARSP 225mm 50mm Step 1. NOTE. Step 2. Place two ridge beams as There is a 50mm overlap of the Use the ZARSP to connect at shown and push them together.
  • Page 12 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH PRE-ASSEMBLY OF SPLICED RIDGE BEAM ZARSP = 2x 97A 2x 97AL 2x 97AR Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...
  • Page 13 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH JOINING RIDGE BEAMS To make the total span we must now join the two ridge beams Cut away these two only. Using a hacksaw, remove one protruding section of each ridge beam, this will allow the sections to butt up neatly to each other.
  • Page 14 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH OVERVIEW OF ROOF COMPONENTS Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...
  • Page 15 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH OVERVIEW OF WALL COMPONENTS Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...

  • Page 16: Rear Panel Assembly

    ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH REAR PANEL ASSEMBLY 2 required. One panel requries sheet H30 this end. One panel requries sheet H30 this end. Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...
  • Page 17 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH ROOF PANEL ASSEMBLY 4 required. Two panels will have part 87A fitted to this end only. Fit 81A to edge of sheet with pre- punched holes. Two panels will have part 87A fitted to this end only.
  • Page 18 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH JOINING WALL AND ROOF PANELS To make the total span we must now join sections of sheeting together for the roof and wall. Trim the channels by 16.5mm to 16.5 16.5 allow the sheets to be overlapped.

  • Page 19: Side Panel Assembly

    ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH SIDE PANEL ASSEMBLY 2 required. Outside of shed. Inside of shed. Turn the panel over. Fit the two large gables (16L & 16R) to the inside face of the top channel (77B) Absco Industries Assembly Instruction Manual Model: 60303HK...
  • Page 20 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH DOOR PANEL ASSEMBLY DOUBLE DOOR Vertical door channels are installed in the opposite orientation compared to the horizontal door channels. Long Short fl ange fl ange of of channel channel Four hole set to bolt on padbolt at top and bottom of door.

  • Page 21: Front Panel Assembly

    ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH FRONT PANEL ASSEMBLY DOUBLE DOOR PANEL 1 required. Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...

  • Page 22: Door Panel Assembly

    ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH DOOR PANEL ASSEMBLY SINGLE DOOR PANEL NOTE: Nuts and bolts are also supplied and may be used instead of rivets. Use a 4mm drill bit to enlarge these holes in the jamb NOTE: The holes to fasten the padbolt hasp are not pre-punched to allow for proper alignment.
  • Page 23 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH DOOR PANEL ASSEMBLY SINGLE DOOR Vertical door channels are installed in the opposite orientation compared to the horizontal door channels. Long Short fl ange fl ange of of channel channel Absco Industries Assembly Instruction Manual Model: 60303HK...
  • Page 24 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH FRONT PANEL ASSEMBLY SINGLE DOOR PANEL 1 required. Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...
  • Page 25 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH DOOR PANEL ASSEMBLY SINGLE DOOR PANEL NOTE: Nuts and bolts are also supplied and may be used instead of rivets. Use a 4mm drill bit to enlarge these holes in the jamb NOTE: The holes to fasten the padbolt hasp are not pre-punched to allow for proper alignment.
  • Page 26 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH HIGH PORTAL FRAME DETAILS 2 required. PART C1482 PART C1954 80mm TIP: An easy way to make sure that the angle at the top of the portal frame is correct is to use the gable wall panel as a template to lay the sections out.
  • Page 27 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH HIGH PORTAL FRAME ASSEMBLY STEP 1. x 19 STEP 2. Secure ridge plates x 30 to apex plates STEP 3. M10 Dynabolt STEP 4. High-portal to panel connection, see section PANEL CONSTRUCTION for further infomation.
  • Page 28 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH HIGH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 1. Draw pattern on the concrete in accordance with the dimensions detailed in the assembly instructions. Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...
  • Page 29 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH HIGH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 2. Understand where components are to be positioned Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...
  • Page 30 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH HIGH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 3. Join C1482 to C1954 Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...
  • Page 31 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH HIGH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 4. Join C1482 to C1482 Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...
  • Page 32 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH HIGH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 5. Secure ridge plate (RBP) Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...
  • Page 33 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH HIGH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 6. Secure multi purpose brackets Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...
  • Page 34 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH HIGH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 7. Turn frame over and repeat steps 4 and 5. Absco Industries Assembly Instruction Manual Model: 60303HK 29/11/2021...
  • Page 35 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH HIGH PORTAL FRAME DETAILS Recommended slab dimensions - 6060mm x 3100mm External wall dimensions - 5960mm x 3000mm Internal wall dimensions - 5920mm x 2960mm FIG 8A 2390 1280 2390 Concrete slab Centre of 6060mm x 3100mm...
  • Page 36 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH PANEL CONSTRUCTION NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel are pre-punched for attaching roof sheeting. The base channels are not. With a concrete slab drill a 10mm hole instead of using the supplied hasp.
  • Page 37 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH INSIDE VIEW ROOF CONSTRUCTION STEP 1. STEP 2. Slide the roof panels into position and Secure ridge beam to secure with only one screw in each gable sections with two corner at this stage.
  • Page 38 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH FINAL CONSTRUCTION ANCHORING OF SHED STEP 1. Secure the roof panels to the wall panels Location of 24 concrete anchors. as shown. Refer to section PORTAL FRAME for portal anchor locations. STEP 2.
  • Page 39 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH Absco Large Gable Roof Shed Notes General • 1.G This instruction manual shall be read in conjunction with other consultants drawings, specifi cations and written instructions provided by Absco and/or their representatives. •...
  • Page 40 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH Absco Large Gable Roof Shed Notes Steelwork • 1.S All structural steelwork shall have a corrosion protection system applied consistent with AS/NZS 2312- 2002. • 2.S All structural steelwork detailed within this installation manual shall be minimum Grade 550 for roll formed sections (including roof and wall sheeting and portal frame members) and Grade 250 for angle sections.
  • Page 41 ABSCO HIGHLANDER SHED MODEL: 60303HK 5.96mW x 3.00mD x 2.30mH Absco Large Gable Roof Shed Notes Supporting Slab and Foundations • 1.F The supporting slab foundation for the garden shed shall be of a minimum size indicated on the installation manual.
  • Page 42 Absco Sheds Storage Guidelines • Absco Sheds are designed to be weatherproof for normal weather conditions. In the event of extreme weather conditions such as heavy rain, combined with high wind gusts, the ridge capping, sheeting joins, screw fi xings etc., may exhibit minor deformations which may allow some water entry. These areas should be checked regularly to ensure that maximum strength and protection is maintained.
  • Page 43 Lifetime Warranty Statement This warranty against defects is given by: Absco Industries (ABN: 77 869 708 678) Address: PO Box 119 Acacia Ridge QLD 4110 Ph: 1800 029 701 Fax: 07 3344 1191 Email: admin@absco.com.au Date of issue: 19 December 2018 Details of Manufacturer’s Warranty This product comes with a Lifetime structural warranty from the date of purchase.
  • Page 44 IMPORTANT 1. Manufacturer’s Disclosure This warranty against defects shall not apply in the following situations: A) Where the product is not assembled in accordance with the instructions provided in the product kit; B) Where the product is used to store corrosive materials such as fertilizer, chlorine etc; C) The warranty does NOT cover damage caused by storms, wind, rain, snow or poor foundations;...

This manual is also suitable for:

60303hk