Keypad Lock; About The Fixed Shelf - Summit Appliance accucold PLUS Series Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Keypad Lock

Factory-set default password: The factory-set default password is 0123. If the default
NOTE: Each password starts with a number from 0 to 9 in order. The first password starting
with 0 is the default password. For example, use 1xxx, then 2xxx etc. for 10 users.
Changing password: While the door is open, press the
box) until it jingles, enter the old password and press # within 10 seconds to confirm. Enter
the new password, then press # to confirm.
NOTE: The first digit cannot be changed.
To open the door: While the door is closed, press the START/END key, enter the
password, then press START/END again to confirm.
To lock door manually: Press #.
Function setting of automatic lock: Setting of the auto-lock time: Press the
(inside the battery box), enter a number (any number between 10-99), then press # to
confirm. The auto-lock time can be set between 10-99 seconds after opening the door. If
the time is set less than 10 seconds, the door will not lock automatically, only manually.
Deleting the door-opening passwords: Press the START/END key, enter default
password followed by 0000, then press # and all the door-opening passwords will be
deleted except for the default password.
NOTE: To access the battery box you need to remove only the two small screws on the top
and bottom of that cover. Do not remove the 4 screws holding the keypad and cover to
the appliance door.
In some units, the center shelf is fixed in place and
cannot be removed (see image). This is because the
glycol-filled bottle that contains the temperature
sensors for your alarm and thermometer is best
stored in this location. The center of your refrigerator
or
freezer
will
temperature readings. For proper temperature
monitoring, keep the bottles in place and do not
remove this shelf.
password is lost, press the
seconds, then wait for the warning sound which signifies the factory-set
default password has been restored.
To set the password: While door is open, press the
inside the battery box) until it jingles, enter the 0123 password, then #
within 10 seconds to confirm. Enter your password (1-16 digits), then
press # again to confirm. A total of 10 passwords can be set.

About the Fixed Shelf

provide
the
most
(optional on most models)
key (located inside the battery box) for 30
accurate
14
key (located
key (located inside the battery
key

Advertisement

Table of Contents
loading

Table of Contents