Remote Control Operation - Epson CO-W01 User Manual

Caution: Do not turn the projector on immediately after turning it off. Turning the projector on and off
frequently may shorten the life of the lamp.
3. To transport or store the projector, make sure the status light is off, then unplug the power cord and
any other connected devices or cables.
Caution: To avoid damaging the projector or lamp, never unplug the power cord when the status
light is on or flashing.
Parent topic:
Related tasks
Shutting Off the Picture and Sound Temporarily

Remote Control Operation

The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m)
away.
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Using Basic Projector Features
54