Table of Contents
Advertisement
LOADING THE BATTERY AND xD - Picture Card
0
1
0
2
Battery release catch
1 Slide the battery cover out to open it.
2 Hold the battery so that the arrow markings
are aligned.
3 Use your finger to pull the battery release catch
in the direction shown and insert the battery.
4 Check that the battery is locked in place.
G
!
Do not apply excessive force to the battery cover.
Never open the battery cover while the camera
is still switched on. This could damage the xD -
Picture Card or corrupt the image files on the
xD - Picture Card.
12
TM
4
0
3
0
Indicator
N
N
To remove the battery
Open the battery cover and pull the battery
release catch in the direction indicated to
release the battery.
G
!
Always switch the camera off when removing
the battery.
Indicator
0
1
1 Firmly insert the xD - Picture Card all the way
into the xD - Picture Card slot with the indicator
on the card aligned with the indicator in the
slot.
2 Close the battery cover.
G
!
If you open the battery cover while the camera is still
switched on, the camera is automatically switched
off to protect the xD - Picture Card.
G
!
The xD - Picture Card will not slide fully into the slot if
it is inserted facing the wrong way. Be careful not to
apply excessive force to the xD - Picture Card.
G
!
When storing an xD - Picture Card, always place the
card in the special case or special carrying case.
0
2
xD-Picture Card slot
N
N
Replacing an xD - Picture Card
When you push the xD - Picture Card into the slot
and then slowly remove your finger, the lock is
released and the xD - Picture Card is pushed out.
You can then pull the xD - Picture Card the rest of
the way out.
G
!
Take care not to remove
your finger too quickly
after the lock is released,
as the card may spring
completely out of the slot.
1
13
Advertisement
Table of Contents
