Sony CDP-LSA1 Service Manual page 49

Pin. No. Pin Name
56 TA1P
57 TBON
58 TB0P
59 TA0N
60 TAOP
61 NC
62 NC
63 DVDD
64 NC
65 NC
66 DVSS
67 DVSS
68 DVSS
69 DVSS
70 DVSS
71 DVSS
72 AVSS
73 AVDD
74 DVSS
75 TEST1
76 TEST0
77 DIRECT
78 LINK_ON
79 PC0
80 DVDD
I/O
Arbitration / strobe output; arbitration / speed signal / data input. Reverse-phase I/O pins.(Not used)
I/O
I/O Arbitration / speed signal / data output; arbitration / strobe input. Reverse-phase I/O pins.
I/O Arbitration / speed signal / data output; arbitration / strobe input. Reverse-phase I/O pins.
I/O Arbitration / speed signal / data output; arbitration / strobe input. Standard-phase I/O pins.
Arbitration / strobe output; arbitration / speed signal / data input. Reverse-phase I/O pins.
I/O
— Connected to ground.
— Connected to ground.
— Power supply.
Connected to ground.
—
— Connected to ground.
— Ground.
— Ground.
Ground.
—
— Ground.
— Ground.
— Ground.
Analog ground.
—
— Analog power supply.
— Ground.
I Test mode control pins. Connect to DvDD.
I Test mode control pins. Connect to DvDD.
I PHY-Link interface operating mode setting pin. Connect to DvDD.
I/O Configuration Manager Capable setting pin / Link-On signal output.
I Connected to ground.
— Power supply.
Function
49