Page 1
COPIES OF THIS DOCUMENT The information in this document contains privileged and confidential information. It is intended only for the use of those authorized by Akai Professional. If you are not the authorized, intended recipient, you are hereby notified that any review, dissemination, distribution or duplication of this document is strictly prohibited.
Page 2
Your purchase of the Manual shall be for your own ultimate use and shall not be for purposes of resale or other transfer. As the owner of the copyright to the Manual, Akai Professional does not give you the right to copy the Manual, and you agree not to copy the Manual without the written authorization of Akai Professional.
Page 3
AKAI PROFESSIONAL DISTRIBUTOR AUTHORIZED REPAIR SERVICE CENTER IN THE PROVISION OF REPAIR SERVICES OR TO BE OR MAKE REPAIRS AS AN AUTHORIZED SERVICE CENTER. ALL REPAIRS DONE BY ANY ENTITY OTHER THAN AN AUTHORIZED AKAI PROFESSIONAL SERVICE CENTER SHALL SOLELY...
The product is exposed to water or excessive moisture, c. The AC power supply plug or cord is damaged, d. The product shows an inappropriate change in performance or does not operate normally, or e. The enclosure of the product has been damaged. Confidential Akai Professional Service Manual...
Page 5
Confidential Akai Professional Service Manual...
Page 6
Confidential Akai Professional Service Manual...
Page 7
AKAI PROFESSIONAL LPK25 (AD02) TEST PROCEDURE Confidential Akai Professional Service Manual...
Page 8
LPK25 USB cable AD02 Test Application Setup Attach USB cable between the LPK25 and PC. Start the AD02 Test Application Ensure the correct input and out devices are selected to properly communicate with the LPK25 When connected the unit should automatically enter TEST mode. The operator can change whether the unit is in Test mode or Normal mode by pressing the associated mode button.
Page 9
LED is on. When correct, the operator will press the indicated key to progress through the sub- test. The next test is the Button Test. The operator should press the button indicated on the application. The application will advance to the next button provided that only the indicated button is pressed. Confidential Akai Professional Service Manual...
Page 10
The test is complete when all sub-test pass. Confidential Akai Professional Service Manual...
Page 11
AKAI PROFESSIONAL LPK25 (AD02) Exploded View & Confidential Akai Professional Service Manual...
Page 12
Top plastic housing; 6keys rubber switch with electric carbon,middle 2 are black and other 4 are white and black silkscreen on the top surface; 9pieces screws M2.5*12.0mm P/C black zinc; 2pieces of 7 white mini key 2pieces of 5 black mini key 1piece of single white mini key...
Page 13
MIDIPLUS Co., Ltd. 4F., No.82, Sec. 1, Hankou St. Taipei City, 100 Taiwan TEL: +886-3-3873500 FAX: +886-3-3872558 TO : AKAI professional ATTN : C.C. : FROM : MODEL: AD02 Vendor Leadtime Note YOURUN 2K 1-2weeks 041184000 LABEL FOR BOTTOM AD01,AD02 "ROHS" compliance Sticker 1.00...
Page 14
AKAI PROFESSIONAL LPK25 (AD02) SCHEMATIC FILES Confidential Akai Professional Service Manual...
Need help?
Do you have a question about the LPK25 and is the answer not in the manual?
Questions and answers